曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

4. FLIGHT CAPABILITIES (CONT'D)
DFM0601_009 vsr_afm_0_cas.uni
PERFORMANCE
General
06−01−19
REV 66, Feb 01/07
Reference Stall Speed − Flaps 0°/Landing Gear Up
Figure 06−01−9
DOT Approved
CL−604 Airplane Flight Manual
PSP 604−1
4. FLIGHT CAPABILITIES (CONT'D)
B. Reference Stall Speed – Flaps 20°/Landing Gear Up
The reference stall speeds for a flaps 20° and landing gear up configuration at varying gross
weights and pressure altitude, are provided in Figure 06−01−10. This chart is based upon the
most forward take-off centre of gravity limit at flaps 20°. The speeds shown are valid only for
pressure altitudes at and below 15,000 feet.
Example:
Gross weight = 19,500 kg (42,990 lb)
Flaps setting = 20°
Landing gear = Up
Pressure altitude = 6,000 feet
Reference stall speed = 126.6 KCAS
PERFORMANCE
General
06−01−20
REV 66, Feb 01/07
DOT Approved
CL−604 Airplane Flight Manual
PSP 604−1
4. FLIGHT CAPABILITIES (CONT'D)
DFM0601_010 vsr_afm_20_cas.uni
PERFORMANCE
General
06−01−21
REV 66, Feb 01/07
Reference Stall Speed − Flaps 20°/Landing Gear Up
Figure 06−01−10
DOT Approved
CL−604 Airplane Flight Manual
PSP 604−1
4. FLIGHT CAPABILITIES (CONT'D)
C. Reference Stall Speed – Flaps 30°/Landing Gear Up
The reference stall speeds for a flaps 30° and landing gear up configuration at varying gross
weights and pressure altitude, are provided in Figure 06−01−11. This chart is based upon the
most forward centre of gravity limit at flaps 30°. The speeds shown are valid only for pressure
altitudes at and below 15,000 feet.
Example:
Gross weight = 19,500 kg (42,990 lb)
Flaps setting = 30°
Landing gear = Up
Pressure altitude = 6,000 feet
Reference stall speed = 121.4 KCAS
PERFORMANCE
General
06−01−22
REV 66, Feb 01/07
DOT Approved
CL−604 Airplane Flight Manual
PSP 604−1
4. FLIGHT CAPABILITIES (CONT'D)
DFM0601_011 vsr_afm_00_cas.uni
PERFORMANCE
General
06−01−23
REV 66, Feb 01/07
Reference Stall Speed − Flaps 30°/Landing Gear Up
Figure 06−01−11
DOT Approved
CL−604 Airplane Flight Manual
PSP 604−1
4. FLIGHT CAPABILITIES (CONT'D)
D. Reference Stall Speed – Flaps 45°/Landing Gear Down
The reference stall speeds for a flaps 45° and landing gear down configuration at varying
gross weights and pressure altitude, are provided in Figure 06−01−12. This chart is based
upon the most forward centre of gravity limit at flaps 45°. The speeds shown are valid only for
pressure altitudes at and below 15,000 feet.
Example:
Gross weight = 19,500 kg (42,990 lb)
Flaps setting = 45°
Landing gear = Down
Pressure altitude = 6,000 feet
Reference stall speed = 116.9 KCAS
PERFORMANCE
General
06−01−24
REV 66, Feb 01/07
DOT Approved
CL−604 Airplane Flight Manual
PSP 604−1
4. FLIGHT CAPABILITIES (CONT'D)
DFM0601_012 vsr_afm_45_cas.uni
PERFORMANCE
General
06−01−25
REV 66, Feb 01/07
Reference Stall Speed − Flaps 45°/Landing Gear Down
Figure 06−01−12
DOT Approved
CL−604 Airplane Flight Manual
PSP 604−1
4. FLIGHT CAPABILITIES (CONT'D)
E. Maneuvering Capabilities
The maneuvering capabilities are shown in Figure 06−01−13. The chart shows the maneuver
margin (bank angle and/or g-load factor) for a given weight, C.G., altitude and speed
combination. Alternatively, for a 1.0 g load factor, the chart shows the altitude and speed
margins for a given weight, C.G., and speed combination.
Maneuvering capability is defined relative to buffet onset or stick shaker activation, whichever
occurs first.
Example:
Associated conditions:
Airplane gross weight = 20,412 kg (45,000 lb)
Centre of Gravity (C.G.) = 30% MAC
Indicated Mach No. = 0.74
Pressure altitude = 39,000 feet
Example A in Figure 06−01−13, for the associated conditions mentioned above (enter the
chart from the indicated mach number scale), shows that the maneuvering capability is
equal to 1.3 g or a bank angle of 40°.
Example B in Figure 06−01−13, for the associated conditions mentioned above (enter the
chart from the gross weight scale), shows the altitude and speed margins before buffet or
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：龐巴迪挑戰者604飛機飛行手冊CL604 Airplane Flight Manual 2(36)