曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Compatible: Compatible: Compatible: Compatible:
316L SS
Titanium
Hastalloy C276
HDPE
Fl-HDPE
Ryton
Polypropylene
Teflon
Viton Vinyl Ester (Plasite 4300)
Baked Epoxy (Plasite 9570)
Polyester Fumarate Resin
(Atlac 382)
NOT Compatible: NOT Compatible: NOT Compatible: NOT Compatible:
Carbon Steel
316 SS
316 Ti-SS*
304L SS
304 SS
PVC EDPM-Nordel
Butyl Rubber
Buna N
Buna S
Neoprene
Compatibility determined at ambient temperatures up to 40oC.
* Titanium stabilized 316 can have variable metallurgy and some versions are not compatible with Kathon formulations.
Kathon FP 1.5 Compatibility with Fuel System Components
A. Additives
Biocide Biobor JF
Ethyl Antioxidant 33
DuPont Antioxidant No. 23
DuPont Antioxidant No. 31
DuPont Metal Deactivator
Antistatic Additive ASA-3
Antistatic Additive STADIS 450
Fuel System Icing Inhibitor (Ethylene Glycol Monomethyl Ether)
Fuel System Icing Inhibitor (Diethylene Glycol Monomethyl Ether)
Corrosion Inhibitor DuPont DCI-4A
B. Super Alloys
After high temperature corrosion procedure
C1023 Pure Silver
N 108 Pure Copper
IN713LC Lead-Bronze with an indium diffusion coating S31
Aluminum Alloy –fresh exposed
MarM 002 uncoated Aluminum Alloy – with anodized finish
MarM 002 Aluminized
SRR99
C. Filters
Velcon
D. Paint & Coatings
PR 143
PUIFT 823-707
PR 1560
Primers 5805-1103
KATHON is a registered trademark. The Company’s policy is to register its trademarks where products designated thereby are marketed by the Company, its
subsidiaries or affiliates. These suggestions and data are based on information we believe to be reliable. They are offered in good faith but, as conditions and
methods of use of our products are beyond our control, ROHM AND HAAS COMPANY MAKES NO WARRANTIES EITHER EXPRESSED OR IMPLIED AS
TO THE ACCURACY OR APPROPRIATENESS OF THIS DATA. ROHM AND HAAS COMPANY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY
OF FITNESS FOR A PARTICULAR USE. We recommend that the prospective users determine for themselves the suitability of Rohm and Haas materials and
suggestions for any use prior to their adoption. Suggestions for uses of our products from the inclusion of descriptive material from patents and the citation of
specific patents in this publication should not be understood as recommending the use of our products in violation of any patent or as permission or license to use
any patents of the Rohm and Haas Company. Material Safety Data Sheets outlining known health and safety hazards and handling methods for our products are
available on request. It is a violation of Federal law to use this product, Kathon FP 1.5 in a manner inconsistent with its labeling. KATHON, SEA-NINE,
KLARIX, KORDEK, SKANE, ROZONE, PROCLIN, NEOLONE, SYLVATEK, KORALONE, LEGEND and ROCIMA are trademarks of Rohm and Haas
Company, Philadelphia, Pennsylvania, U.S.A. © 2002 Rohm and Haas Company. All rights reserved.
AIM@Shape
Network Industrial Group (NIG)
Kick-Off Meeting
Speaker:
André Stork
Darmstadt, 18.03.2004
AIM@SHAPE
NIG Kick-Off Meeting
Darmstadt, 18.03.2004
Purpose of the NIG
 Expertise of NIG members will be used to:
 Identify industrial open problems
 Tune the research activities to address industrial
needs
 Evaluate the research outcomes
 Set-up of targeted R&D projects between
AIM@SHAPE and NIG Partners
 Dissemination and exploitation of network
results
 NIG addresses also SMEs
 Stages of PhD students at NIG companies
AIM@SHAPE
NIG Kick-Off Meeting
Darmstadt, 18.03.2004
Network Industrial Group (NIG)
 Companies that expressed their interest (before
the start of aim@shape):
 Philips Research, Netherlands (Video, Edutainment)
 Think3, France/Italy (CAD/CAE/PLM)
 Technimold, Italy (SME, Reverse Eng., Rapid Prot.)
 Pininfarina, Italy (Car stylist)
 Alessi, Italy (Small appliances design and manufct.)
 Geometry Factory, France (SME, SW development)
 EADS CCR France (AeroSpace Industry)
 Dassault Systèmes, France (CAD/CAE/PLM)
 Géonuméric, France (SME, CAE and DMU)
 STS Sketch to Surfaces, Italy, (SME, Industr. Design)
AIM@SHAPE
NIG Kick-Off Meeting
Darmstadt, 18.03.2004
What are aim@shape partners doing?
Domains
Industrial
Aesthetic
Design
Product
Design
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料34(14)