曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Knob used on the B737 flight deck in overhead crossfeed.
Knob comes with exactly the same inbus Screws as used on the real knob.Perfectly finished.
Dia. 6,35mm
10.99 Eur.
Opencockpits Catalogue pag.113/137
05/2010
737 Knob Type 4
Model : 7K7374
Knob used on the B737 flight deck in the rudder trim.
Knob comes with exactly the same inbus Screws as used on the real knob.Perfectly finished.
Dia. 6,35mm
14.99 Eur.
Standard grey concentric knob
Model : 4TB2
Grey concentric knob that can be used with encoders, potentiometers or rotary switches doubles. Dia. 6,35 & 3mm
4.50 Eur.
Standard grey knob
Model : 4TB1
Grey knob that can be used with encoders, potentiometers or rotary switches. Dia. 6.35mm
2.00 Eur.
Opencockpits Catalogue pag.114/137
05/2010
Others Cockpit products
Opencockpits Catalogue pag.115/137
05/2010
Others Cockpit products -/- Boeing
(Pre-order) throttle 737 aluminium motorized
Model : MEC-TH73
Principales Features:
- 99% Metal builded, only exception of legends.
- Levers milled from an aluminum block wich gives an extreme hardness.
- All pieces are cutted by laser, that gives a perfect precission.
- Compatible with PMDG, Project Magenta, FlightDesk software, On-737, FS2004, FSX, X-Plane and also totally
configurable by user.
- Spoiler and Flaps levers made by milling an aluminum block also.
- Parking brake lever works as real, you need to release it by pushing both pedals brakes.
- Reverse levers are independent, each one works over one motor
- Movement of levers done by high torque motors.
- Motors allows to act over Throttle lever altough Autotrhotlle are connected
- Silkscreneed knobs made with very hard resine.
- Newest clutch and transmission system.
- Interface through SIOC language
- Trim needles completely operatives.
- Trim Wheels are motorized also by high torque motors.
- TOGA and A/T buttons implemented.
- STAB TRIM and AUTOPILOT CUTOUT switches installed and operatives
- Fully designed by Opencockpits Team.
- Assembled and tested completely in our facilities.
- Special protection layer paint. Painting finished with pro systems.
- Completely backlighted legend, to operate by night.
Opencockpits Catalogue pag.116/137
05/2010
Price: 2.499 Euros (+IVA)
The pre-order payment is for reserve and initiate the procedure to mount the product. The final price should be
payed when the product is ready (discounting the deposit payment). The lead time is aprox 50 days.
150.00 Eur.
Aluminium DZUS fastener (x6)
Model : 4TDZ
Exact replica of aircraft fastener DZUS in aluminium. (6 units)
screw M4x16mm and nut included.
5.00 Eur.
Aluminium DZUS fastener Painted (x6)
Model : 4TDZP
Exact replica of aircraft fastener DZUS in aluminium. (6 units)
screw M4x16mm and nut included.
Primed and painted in gray type Boeing.
6.00 Eur.
Boeing style Fire Handles
Model : MEC-HFB
Boeing style Fire Handles.
The Fire Handles are functioning almost exact as the ones used in real aviation. When the bright red lights inside
the handle light up, you have to pull the handle to shut the engine off and rotate it to extinguish the fire.
The Fire Handles are delivered assembled and ready for installation.
246.00 Eur.
Opencockpits Catalogue pag.117/137
05/2010
Landing gear lever B737
Model : MEC-TREN73
Landing gear lever Boeing 737.
Built in aluminum with silkscreen text.
Include 2 microswitches for position detection. Compatible with every digital input I/O board.
Completly assembled and ready for use.
134.00 Eur.
Paint Boeing gray type
Model : PIN737
Gray paint Boeing type.
This special paint use two components (very hard). Using two bottles of 175cc and 350cc for each component.
(550cc of total paint)
Before you use the paint, you need to mixture two parts of one component with one part of the other.
39.00 Eur.
Pedestal bay 737
Model : MEC-PED737
Pedestal bay for Boeing 737. Builded in wood, aluminium and plexiglass. Completly painted and ready for use in
your cockpit.
Real sizes and ready for mount the modules in the rack.
Fuses and connectors with the labels like the real.
You can mount the product in 5 minutes because we send with fast assembly components, for minimize the
shipment costs.
Note:Can be 1 week lead time for prepare the product.
297.00 Eur.
Opencockpits Catalogue pag.118/137
05/2010
Yoke 737 molded
Model : YOK73MOD
Exact replica of Boeing 737 Yoke molded in rigid plastic. Not finished.
With holes and internal cable for connect witches.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料7(83)