曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(a) a complete and current technical data file for each type or model
article, including design drawings and specifications;
(b) complete and current inspection records showing that all
inspections and tests required to ensure compliance with this part
have been properly completed and documented.
Civil Aviation Safety Regulations 1998 (CASR)
Office of Legal Counsel CASR – 1st Edition – January 2003
Civil Aviation Safety Authority Replacement Page— Amdt No. 5: Effective 27 November 2003
Part 21 — 118
Retention of records
(2) The manufacturer must retain the records mentioned in
paragraph (1) (a) until it no longer manufactures the article.
Penalty: 50 penalty units.
(3) If the manufacturer stops manufacturing the article, the manufacturer
must send copies of the records mentioned in paragraph (1) (a) to
CASA within 30 days after ceasing that manufacture.
Penalty: 50 penalty units.
(4) The manufacturer must retain the records mentioned in
paragraph (1) (b) for at least 2 years.
Penalty: 50 penalty units.
(5) An offence against subregulation (2), (3) or (4) is an offence of strict
liability.
Note For strict liability, see section 6.1 of the Criminal Code.
Source: FARs section 21.613 modified.
21.615 CASA inspection
(1) Upon the request of CASA, an article manufacturer manufacturing an
article under an ATSO authorisation must allow CASA to:
(a) inspect any article manufactured under that authorisation; and
(b) inspect the manufacturer’s quality system; and
(c) witness any tests; and
(d) inspect the manufacturing facilities; and
(e) inspect the technical data files on that article.
(2) If the manufacturer does not comply with a request under
subregulation (1), the ATSO authorisation is suspended until the
request is complied with.
Source FARs section 21.615 modified.
Civil Aviation Safety Regulations 1998 (CASR)
CASR Office of Legal Counsel
1st Edition – January 2003 Civil Aviation Safety Authority
Part 21 — 119
21.617 Issue of letters of ATSO design approval: import appliances
(1) A letter of ATSO design approval may be issued for an appliance that
is manufactured in a foreign country with which Australia has an
agreement for the acceptance of these appliances for export and
import and that is to be imported into Australian territory, if:
(a) the NAA of the country in which the appliance was
manufactured certifies that the appliance has been examined,
tested, and found to meet the applicable ATSO approved under
an ATSO authorisation, or letter of ATSO design approval,
under paragraph 21.305 (b) or the applicable performance
standards of the country in which the appliance was
manufactured and any other performance standards CASA
prescribes to provide a level of safety equivalent to that provided
by the ATSO approved under an ATSO authorisation, or letter of
ATSO design approval, under paragraph 21.305 (b); and
(b) the article manufacturer has submitted to CASA one copy of the
technical data required in the applicable performance standard
through the NAA of the country in which the appliance was
manufactured.
(2) The letter of ATSO design approval will be issued by CASA and
must list any deviation granted to the manufacturer under regulation
21.609.
(3) After CASA has issued a letter of ATSO design approval and an
airworthiness approval mentioned in paragraph 21.502 (1) (b) has
been issued, the manufacturer is authorised to identify the appliance
with the ATSO marking requirements described in paragraph
21.607 (c) and in the applicable ATSO. Each appliance must be
accompanied by an airworthiness approval mentioned in paragraph
21.502 (1) (b).
Source FARs section 21.617 modified.
21.619 Non-compliance
CASA may suspend or cancel the ATSO authorisation or letter of
ATSO design approval of any article manufacturer who identifies
with an ATSO marking an article not meeting the performance
standards of the applicable ATSO or TSO (including any deviations
approved under subregulation 21.609 (3)).
Source FARs section 21.619 modified.
Note See also regulations 21.002C and 21.002E in relation to suspension and
cancellation of ATSO authorisations or letters of ATSO design approval.
Civil Aviation Safety Regulations 1998 (CASR)
Office of Legal Counsel CASR
Civil Aviation Safety Authority 1st Edition – January 2003
Part 21 — 120
21.621 Transferability and duration
(1) An ATSO authorisation or letter of ATSO design approval is not
transferable and continues in force until surrendered or cancelled .
(2) However, an ATSO authorisation or a letter of ATSO design approval
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：澳大利亞CASR Civil Aviation Safety Regulations上(99)