曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

made; and
(c) for which no foreign type certificate has been issued.
21.132A Product design
(1) The product design of an unapproved Class I product is the design
that was submitted with the application for a foreign type certificate.
(2) The product design of a Class II or Class III product:
(a) consists of drawings, specifications and other information that:
(i) fully describe the product; and
(ii) are approved by:
(A) CASA; or
(B) an authorised person; or
(C) if the product is manufactured under an agreement
with a foreign manufacturer for supply to that
manufacturer — the NAA of the relevant foreign
country; and
(b) must include all the information necessary to manufacture the
product, including:
(i) information that shows the dimensions and appearance of
the product; and
(ii) the materials used in the manufacture of the product; and
Civil Aviation Safety Regulations 1998 (CASR)
CASR – 1st Edition – January 2003 Office of Legal Counsel
Replacement Page – Amdt No. 5: Effective 27 November 2003 Civil Aviation Safety Authority
Part 21 — 55
(iii) information about the process or processes used to
manufacture the product; and
(iv) any methods used to test or measure the product; and
(v) information that shows the structural strength of the
product.
21.133 Eligibility
(1) A person is eligible to apply for a production certificate for a Class I
product if the person:
(a) holds a current type certificate or foreign type certificate for the
product; or
(b) holds the right, under a licensing agreement, to the benefits of
the type certificate or foreign type certificate for the product; or
(c) holds a supplemental type certificate or foreign supplemental
type certificate for the product.
(2) A person is also eligible to apply for a production certificate if:
(a) the person has an agreement with a foreign manufacturer to:
(i) manufacture a Class I, Class II, Class III or unapproved
Class I product; and
(ii) supply the product to the foreign manufacturer; and
(b) the terms of the agreement require that the person be approved to
manufacture the product.
(2A) A person is also eligible to apply for a production certificate for a
Class II or Class III product if:
(a) the product is an aircraft component of a type in respect of which
a certificate of type approval is in force; and
(b) the person is lawfully manufacturing the component or is
proposing to manufacture the component and is entitled to do so.
(2B) A person is also eligible to apply for a production certificate to
manufacture a Class II or Class III product on a one-off basis for
supply to:
(a) the holder of a certificate of approval engaged in the
maintenance of an aircraft for installation in or on the aircraft; or
(b) the operator of an aircraft or the owner of an aircraft, aircraft
engine or propeller for installation in or on the aircraft, aircraft
engine or propeller.
(3) An application for a production certificate must be in an approved
form.
Source FARs section 21.133 modified.
21.134 Issue of production certificate
(1) CASA must issue a production certificate to an applicant for the
certificate if the applicant:
Civil Aviation Safety Regulations 1998 (CASR)
Office of Legal Counsel CASR – 1st Edition – January 2003
Civil Aviation Safety Authority Replacement Page – Amdt No. 5: Effective 27 November 2003
Part 21 — 56
(a) is eligible, under regulation 21.133, to apply for the certificate;
and
(b) applies for the certificate in accordance with this Subpart; and
(c) is entitled, under this Subpart, to the certificate; and
(d) otherwise complies with this Part.
(2) CASA may issue the production certificate subject to any conditions
that CASA considers necessary in the interests of aviation safety.
(3) Any conditions must be in writing and set out in, or attached to, the
production certificate.
(4) A person must not engage in conduct that results in a breach of a
condition set out in the production certificate.
Penalty: 50 penalty units.
(5) An offence against subregulation (4) is an offence of strict liability.
Note For strict liability, see section 6.1 of the Criminal Code.
21.135 Requirements for entitlement
(1) An applicant is entitled to a production certificate if CASA is
satisfied that the applicant has complied with regulations 21.139 and
21.143 in relation to the Class I, Class II, Class III or unapproved
class I product to be manufactured under the certificate.
(2) CASA may inspect the applicant’s organisation and manufacturing
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：澳大利亞CASR Civil Aviation Safety Regulations上(69)