曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Another example of enhanced, instructor-oriented material for pilot training is a maneuvers guide or handbook which includes the PTS as an integral part of the description of maneuvers and procedures. Students learn from the beginning how to perform the maneuver or procedure and also become familiar with the performance criteria. Instructors need not refer to another document to evaluate student performance. The examiner for the Airframe and Powerplant (A&P) is required to ask four questions in each of the subject areas, which are required by the regulations to be taught. The examiner also is required to assign a practical project from each subject area. Individual maintenance instructors, as well as publishers, have compiled lists of typical questions and projects. Use of these questions and projects as part of the syllabus helps an instructor ensure that all subject areas for a particular class have been covered.
There are many ways to incorporate design features in training materials in order to facilitate regulatory compliance, required endorsements, and recordkeeping. Computer-based training also can be designed so the progress of the student can be tracked and documented. As training becomes more detailed and complex, instructor-oriented materials can be a valuable instructional aid for aviation instructors. More information on enhanced training materials is presented in chapter 6.Projected Material
Traditional aids in this group include slides, filmstrips, and transparencies for overhead projection. In recent years, video (VHS, compact disks (CDs), digital video disks (DVDs), or computer files), and computer slide shows incorporating text, graphics, video, and animations, have pushed aside traditional training aids. Whatever type of projected training aid used, it is essential for the content to be current and support the lesson.
Use of projected materials requires planning and practice. The instructor should set up and adjust the equipment and lighting beforehand and then preview the presentation. During a classroom session, the instructor should provide students with an overview of the presentation before showing it. After the presentation, the instructor should allow time for questions and a summary of key points.
Computer-generated slide shows have changed the way information is presented to today’s student. While a computer, screen, and projector may be needed for the classroom, a laptop computer may be all that is needed for the one-on-one presentation. These slide shows can be only bulleted information or incorporate animation and video clips. The instructor can tailor the presentation for the class and also include graphics at appropriate points. A wireless mouse can be used to activate the slide changes from anywhere in the room.
Another convenient and cost effective instructional aid is the overhead transparency and projector. Instructors can create their own overhead acetate or plastic transparencies, or they may purchase commercially produced ones. Material composed on a computer word processing and graphics program can also be printed onto transparencies.
The equipment can be placed at the front of the room, allowing the instructor to maintain eye contact with students. [Figure 4-18] The brilliant light source concentrated at a short distance makes it possible to use the projector in lighted areas. The instructor also can write on a blank transparency
4-27
Figure 4-18. Interior of a lecture room designed for trainings with enhanced training materials utilizing projection equipment.
as the lesson progresses, much like a chalk or marker board. Additional transparencies can be overlaid onto the original to show development or buildup of an event or display. Overlays can also be cut into various shapes and moved about in relation to the base transparency. This is a useful technique for displaying dial indications or fitting several parts of a component together so relative motion can be simulated.
With any projection equipment, instructors should ensure the projector does not obstruct the students’ line of sight. The projection angle should be adjusted to eliminate image distortion. Finally, although the overhead projector is simple to operate and requires little maintenance, it has disadvantages. Most projectors are bulky to handle and store, and the projector cooling fan may be noisy.
Although vastly different from other projection equipment, the opaque projector reflects light from the surface of the picture or three-dimensional object onto a regular projection screen. The height of usable objects is limited to the space between the top of the lowered projection plate and the body of the projector, usually about two or three inches. The area of the picture or object is limited to approximately 10 inches by 10 inches.
Items which may be projected are practically limitless. A postage stamp, typed material, textbook illustrations, or a defective spark plug are representative of the items that may be projected. This equipment is especially adapted to enlarging diagrams and small charts for display purposes. Since the material projected requires no special preparation, the cost is very low. Many of the limitations of the overhead projector are also true of the opaque projector.Video
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Aviation Instructor’s Handbook下(27)