曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

annunciation (TMA) on the CDS engine display.
The thrust modes show in sequence on the TMA. The word ON
shows on the CDUs as each mode comes into view on the TMA.
On the CDS navigation displays, the message FMC INTERFACE
OK will show.
FIXED OUTPUTS Page 2/2
These CDU annunciators are ON during the FIXED OUTPUTS
test:
* MSG
* FAIL
* OFST.
On the autoflight status annunciators (ASA), both FMC
annunciators will also be on.
FMCS - TRAINING INFORMATION POINT - FMCS BITE PAGES - FMCS-FIXED OUTPUTS
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.142
D633A101-SHZ1 Oct 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-061
FMCS - TRAINING INFORMATION POINT - FMCS BITE PAGES - FMCS-FIXED OUTPUTS
FMCS - TRAINING INFORMATION POINT - FMCS BITE PAGES - FMCS-FIXED OUTPUTS
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.143
D633A101-SHZ1 Oct 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-061
General
The model/engine configuration page shows the airplane and
engine configuration. It also shows the engine combustor type
and the brake option selected. The engine ratings will show this
data:
* Full rated takeoff thrust
* First takeoff derate thrust
* Second takeoff derate thrust
* Takeoff bump thrust rating (if selected).
If the takeoff derate (TO-1 or TO-2) or the takeoff bump rating do
not exist for the selected engine/airframe configuration, NONE
will be shown in that thrust data field.
To access this page select MODEL/ENG (LSK 1R) from the
FMCS BITE page.
FMC MODEL/ENG Pages
When you power up, the FMC monitors the airframe/engine
configuration program pins to make sure the configuration is
valid. If there is a non-normal condition, one of these messages
shows:
* Message PARITY ERROR shows if the airframe/engine
configuration program pins are not set to odd parity. It also
shows for an invalid SDI discrete configuration
* INVALID shows if the model/engine performance database is
not installed or the loaded MEDB has failed its validity check
* PROGRAM PIN NOT IN MODEL/ENGINE DATA BASE shows
if the airframe/engine configuration program pins do not
match the data in the model/engine performance database.
FMCS - TRAINING INFORMATION POINT - FMCS BITE PAGES - AIRPLANE MODEL AND ENGINE CONFIGURATION
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.144
D633A101-SHZ1 Oct 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-065
FMCS - TRAINING INFORMATION POINT - FMCS BITE PAGES - AIRPLANE MODEL AND ENGINE CONFIGURATION
FMCS - TRAINING INFORMATION POINT - FMCS BITE PAGES - AIRPLANE MODEL AND ENGINE CONFIGURATION
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.145
D633A101-SHZ1 Oct 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-065
THIS PAGE IS INTENTIONALLY LEFT BLANK
FMCS - TRAINING INFORMATION POINT - FMCS BITE PAGES - AIRPLANE MODEL AND ENGINE CONFIGURATION
34-61-00
Page 98.146
D633A101-SHZ1 Jun 10/2007
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
General
To show the FMCS software options, select SW OPTIONS on
line select key (LSK) 3R, from the FMCS BITE page.
Software Option Pages
The software options pages show the size of the navigation
database, software option code, default values for RNP, and a
listing of the software options that are enabled. The graphics
show pages with example options.
SHZ 001-003 PRE SB 737-34-1666
The navigation data base (NDB) size is 2048K words. The
default size is 2.5 Mwords or 5.0 Mbytes.
SHZ 001-003 (POST SB 737-34-1650 AND PRE SB 737-34A1801)
OR PRE SB 737-34-1918; SHZ 009-999 PRE SB 737-34-1918 OR
(POST SB 737-34-1650 AND PRE SB 737-34A1801)
The navigation data base default size is 3.5 Mwords or 7
Mbytes.
SHZ ALL PRE SB 737-34-1918
The software option code is a 12 digit hexadecimal number that
indicates the software options that are enabled. Each option has
a hexadecimal code. The codes for the enabled options are
summed, and this is shown on the software options page. These
are the software options your airline selected:
SHZ ALL POST SB 737-34-1918
The software option code is a 16 digit hexadecimal number that
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737NGAMM4(25)