曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

FLIGHT MANAGEMENT SYSTEM (FMS) (CONT'D)
Function Keys (Cont’d)
· (Directto/
pattern/intercept) Key − Pushing the DIR function key inserts DIRECT,
PATTERN and INTERCEPT prompts on the ACTIVE FLT PLAN pages. If other than an
active flight plan page is displayed when pushing the button, the first page of the flight plan
is displayed. If the active flight plan is already displayed, it will remain on the current page of
the flight plan.
− DIRECT − The FMS DIRECTTO
function can either be lateral or vertical. The left line
select keys are used for lateral and the right line select keys are used for vertical
directto.
Lateral DIRECTTO
computes the turn and the course from the end of the
turn. If the directto
waypoint is in the flight plan, pushing the line select key next to the
directto
waypoint engages the directto.
A directto
course is calculated and the
airplane begins turning for the waypoint. Vertical DIRECTTO
is connected to an
altitude constraint at a waypoint in the flight plan. The altitude constraint must be in the
flight plan before the vertical directto
is done. Vertical DIRECTTO
can be used for
climbs and descents. The airplane does not respond to the vertical DIRECTTO
unless
the altitude selector is properly set above for climbs and below for descents.
GF1710_118
KICT − KORL FPL 2/3
MGM 300/ .75 M
TLH 00 + 24 .88 / FL 350
132° 141NM
TLH84 00 + 14 .88 / FL 350
127° 84.1NM
PATTERN INTERCEPT
− − − − − DIRECT SPD CMD
− PATTERNS − The PATTERNS prompt is used to start the pattern definition or review
procedures. PATTERNS can also be selected from the NAV INDEX. The following
patterns are available: HOLD, PROCEDURE TURN, FLYOVER, ORBIT and RADIAL.
GF1710_119
PATTERNS 1/1
REVIEW
HOLD PCDR TURN
FLY OVER ORBIT
RADIAL
− INTERCEPT − INTERCEPT is used to define an intercept waypoint inserted in the flight
plan between two other waypoints. The crossing of these two courses is the intercept
waypoint.
GF1710_120
INTERCEPT 1/1
CLEAR
− − − ° RAD / CRS OR HDG SEL
− − − ° RAD OR CRS − − −
TOD PGS
FROM DRK
NAVIGATION
Flight Crew Operating Manual Rev 2A, Apr 11, 2005
CSP 700−5000−6
Volume 2
17−10−62
FLIGHT MANAGEMENT SYSTEM (FMS) (CONT'D)
Function Keys (Cont’d)
· VIDEO Key (CDU−820 only) − Depending on installation, pressing the VIDEO function key
results in the following:
− The scratchpad message VIDEO NOT AVAILABLE will be displayed if there is no
external video input to the or if access is externally selectable.
− The LCD will display a video signal if one video input is available. If multiple video
inputs are available but selectable externally to the CDU, the LCD will display the
externally selected video input.
− If more than one video input is available and video selection is internal to the CDU, the
VIDEO INDEX page will be displayed.
If a video input is being displayed, selection of other function keys (PERF, NAV, FPL,
PROG, DIR) will return the display to normal FMS operation.
NOTE
If an annunciator and/or scratchpad message is displayed while
viewing a video input, the display will return to the page shown
before the VIDEO key was pressed.
· GRAPHIC Key (CDU−820 only) − Depending on installation, pressing the GRAPHIC
function key results in the following:
− The scratchpad message GRAPHIC NOT AVAILABLE will be displayed if there is no
external video input to the or if access is externally selectable.
− If a graphic input is available and access is internal to the CDU, the GRAPHIC INDEX
page will be displayed.
If a graphic input is being displayed, selection of other function keys (PERF, NAV, FPL,
PROG, DIR) will return the display to normal FMS operation.
NOTE
If an annunciator and/or scratchpad message is displayed while
viewing a video input, the display will return to the page shown
before the GRAPHIC key was pressed.
· ATC (Air Traffic Control) Key (CDU−820 only) − Pressing the ATC function key will display
the scratchpad message ATC NOT AVAILABLE.
· BACK Key (CDU−820 only) − Pressing the BACK function key will display the scratchpad
message BACK COMPLETE unless video or graphic input is available. If a video or graphic
input is accessed thought the VIDEO INDEX or GRAPHIC INDEX page, pressing the BACK
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Bombardier_Global_000-Navigation(23)