defaULt Nav paGe to QUiCKLy diSpLay the defaULt Nav paGe
Course Deviation Indicator (CDI)
From any page, press and hold the CLR Key for approximately two seconds.
to SeLeCt a diffeReNt data item foR aNy data fieLd
1) With the Default NAV Page displayed, press the MENU Key to display the Default NAV Page Menu.
2) The ‘Change Fields?’ option is already highlighted, so press the ENT Key to select this option.
The following symbols are used on the Default NAV Page (directly below the CDI), to depict the ‘active leg’ of a flight plan or direct to:
Direct-to a Waypoint
Course to a Waypoint, or Desired Course between Two Waypoints
Procedure Turn
Procedure Turn
Vectors-to-Final
DME Arc to the Left
DME Arc to the Right
Left-hand Holding Pattern
Right-hand Holding Pattern
4) Turn the small right knob to display the list of available data items. Continue turning the small right knob to select the desired data item from the list.
5) Press the ENT Key to select the desired data
item and return to the Default NAV Page.
6) Press the small right knob momentarily to
remove the cursor from the page.
map paGe
Map Display Data Fields Desired Track Present Position
Map Range
The following symbols are used to depict the various airports and navaids on the Map Page:
Symbol Description
Airport with hard surface runway(s); (primary runway shown)
Airport with soft surface runway(s) only
Private Airfield
Heliport
VOR
VOR/DME
DME
Localizer
Intersection
VORTAC
TACAN
NDB
Locator Outer Marker
to SeLeCt a map RaNGe
1) Press the up arrow of the RNG Key to zoom
out to a larger map area.
2) Press the down arrow of the RNG Key to zoom
in to a smaller map area and more detail.
to SeLeCt a diffeReNt data item foR
aNy data fieLd
1) With Map Page displayed, press the MENU
Key to display an options menu.
2) Turn the large right knob to highlight ‘Change
Fields?’ and press the ENT Key.
3) Turn the large right knob to highlight the data
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：GNS 430/430A Quick Reference 快速參考(6)
