曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

bottom Row KeyS
The CDI Key is used to toggle which navigation source (GPS or VLOC) provides output to an external HSI or CDI.
The OBS Key is used to select manual or automatic sequencing of waypoints. Pressing the OBS Key selects OBS mode, which retains the current ‘active to’ waypoint as the navigation reference even after passing the waypoint (i.e., prevents sequencing to the next waypoint). Pressing the OBS Key again returns the unit to normal operation, with automatic sequencing of waypoints. When OBS mode is selected, the pilot may set the desired course to/ from a waypoint using the ‘Select OBS Course’ pop-up window, or an external OBS selector on the HSI or CDI.
The MSG Key is used to view system messages and to alert the pilot to important warnings and requirements.
The FPL Key allows the pilot to create, edit, activate, and invert flight plans, as well as access approaches, departures, and arrivals. A closest point to flight plan feature is also available from the FPL Key.
The PROC Key allows the pilot to select and remove approaches, departures, and arrivals from the flight plan. When using a flight plan, available procedures for the departure and/or arrival airport are offered automatically. Otherwise, the pilot may select the desired airport, then the desired procedure.
to poweR oN the GNS 430
1)  Turn the COM Power/Volume Knob clockwise 
to turn the unit power on and set the desired 
radio volume. 
2)  A welcome page appears briefly while the unit 
performs a self test, followed sequentially by 
the Unit Type Page and the Software Versions 
Page. Then (depending on configuration) the 
Weather Page, the Traffic Page, the Aviation 
Data Page, the Land/Terrain/Obstacles Data-
base Page, and the SituationalAwareness Page 
are sequentially displayed. 

3)  Once the self-test concludes, the Database Confirmation Page is displayed, showing the effective and expiration dates of the Jeppesen database on the NavData. card. Press the ENT Key to acknowledge the Database Page and proceed to the Instrument Panel Self-test Page.

4)  The Instrument Panel Self-test Page allows the pilot to verify that the GNS 430 is communicating properly with in-panel instruments. Compare on-screen indications with the information depicted on connected instruments, such as the CDI, HSI, RMI, and/or external annunciators. After verifying proper operation, press the ENT Key to display the Satellite Status Page.

SCReeN LayoUt (wiNdowS)
The GNS 430’s display is divided into three separate ‘windows’ (or screen areas). The left 1/4 of the display provides a COM window (top two lines) and a VLOC window (bottom two lines). The right 3/4 of the display consists of a GPS window, which shows the various navigation, waypoint information and settings ‘pages’.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：GNS 430/430A Quick Reference 快速參考(2)