4)  Continue turning the small right knob to scroll through the list and highlight the desired airport. 
5)  Press the ENT Key to confirm the selected waypoint, and press the ENT Key again to activate the direct-to function. 

to view aiRpoRt iNfoRmatioN

1)  Turn the large right knob to select the WPT Page Group. ‘WPT’ appears in the lower right corner of the screen. 
2)  Turn the small right knob to select the desired WPT page. Airport information is displayed on the first six WPT pages: airport location, airport runway, airport frequency, airport approach, airport arrival, and airport departure. 
3)  Press the small right knob to activate the 
cursor. 
4)  Use the small and large right knobs to enter the identifier of the desired airport. 
5)  Once the identifier is entered, the information for that airport appears on the page. Press the ENT Key to accept the selected identifier. 

to view aiRpoRt iNfoRmatioN by

faCiLity Name oR City 
1)  Select the Airport Location Page (see page 6). 
2)  Press the small right knob to activate the 
cursor. 
3)  Turn the large right knob to highlight the facility name (second line) or the city (third line) field. 
4)  Turn the small and large right knob to enter the facility name or city location of the desired destination waypoint. When spelling the facility name or city, the GNS 430’s spell’N’Find feature will select the first entry in the database based upon the characters that have been entered up to that point. 

5)  Once the identifier is entered, the information for that airport appears on the page. Press the ENT Key to accept the selected identifier. 
6)  To view the other airport information pages, press the small right knob to remove the flashing cursor and turn the small right knob to select the desired page. 

to aUto-tUNe a fReQUeNCy fRom a LiSt
The GNS 430’s auto-tune feature allows the pilot to quickly select any database frequency in the GPS Window as the standby frequency. With a minimum of keystrokes, any frequency listed in the GPS Window can be transferred to the standby field of the COM or VLOC window.
1)  Select the Airport Frequencies Page from the 
WPT Page Group (see page 6). 
2)  Press the small right knob to place the cursor 
on the airport identifier field. 
3)  Use the small and large right knobs to enter 
the identifier of the desired airport. Press the 
ENT Key when finished. 

4)  Turn the large right knob to highlight the desired frequency. 
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：GNS 430/430A Quick Reference 快速參考(5)