(2)
The EICAS software contains two part numbers, the OPS (Operational Program Software) and the OPC (Operational Program Configuration).
B. References
(1) 24-22-00/201, Electrical Power Control
C. Access
(1) Location Zones
211/212 Flight Compartment
ú
31-41-00
ALL ú ú 24 Page 208 ú May 28/00
A
757 MAINTENANCE MANUAL
D. Procedure
S 862-092
(1)
Supply electrical power (AMM 24-22-00/201).
S 862-093
(2)
Make sure that the EICAS circuit breakers that follow are closed:
(a)
11J2, EICAS CMPTR LEFT
(b)
11J3, EICAS UPPER DSPL
(c)
11J29, EICAS CMPTR RIGHT
(d)
11J30, EICAS LOWER DSPL
(e)
11J31, EICAS DSPL SW
(f)
11J32, EICAS DSPL SELECT
S 752-094
(3) Do the steps that follow to show the EICAS software part numbers:
(a)
Push the CONF/MCDP switch on the EICAS MAINT panel.
(b)
Observe the OPS and OPC P/Ns (part numbers) on the bottom EICAS display.
NOTE: The OPS and OPC P/Ns (part numbers) show on the lower
____ half of page 1 on the CONF/MCDP page.
S 862-095
(4) Remove electrical power if it is not necessary (AMM 24-22-00/201).
TASK 31-41-00-752-096
7. How to Show an EICAS Fault Reporting Page
_________________________________________
A. General
(1)
This task shows how to retrieve EICAS fault reporting pages from the EICAS self test page.
(2)
The fault reporting pages contain either PRESENT STATUS faults or FAULT HISTORY faults.
(a) The PRESENT STATUS faults occurred during flight leg 0.
ú
31-41-00
ALL ú ú 07 Page 209 ú Sep 28/01
A
757 MAINTENANCE MANUAL
(b) The FAULT HISTORY faults occurred during flight leg 1 through flight leg 9.
B. References
(1) 24-22-00/201, Electrical Power Control
C. Access
(1) Location Zones
211/212 Flight Compartment
D. Procedure
S 862-098
(1)
Supply electrical power (AMM 24-22-00/201).
S 862-099
(2)
Make sure that the EICAS circuit breakers that follow are closed:
(a)
11J2, EICAS CMPTR LEFT
(b) 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：757 AMM 飛機維護手冊 儀表 CHAPTER 31 - INSTRUMENTS 2(55)
