(2)  
Remove the hydrolok (100) by removing the screw (105) and nut (110).

(3)  
Remove the recline arm (35) by removing the screws (40, 45), washers (50), spacers (55, 60, 65), and nuts (70).

(4)  
Remove the spacers (75, 80, 90) and screws (85, 95).

Page 3003
B/E AEROSPACE
COMPONENT MAINTENANCE MANUAL
MILLENNIUM. 88813 SERIES

E.  Disassembly of the Back Assembly (Continued) (Refer to IPL FIG 4)
(5)  
Remove the spring assemblies (115) by removing the screws (120) and washers (125).

(6)  
Remove the headrest friction blocks (135) by removing the screws (140), washers (145), springs (150), and spacers (155).

(7)  
Remove the roller support bracket (130) and the roller assemblies (160, 165) by removing the covers (190), screws (170), stop assembly (175), washers (180), and spacers (185).

F.  Seatpan Removal (Refer to IPL FIG 5)
(1)  Remove the seatpan assemblies (5) from the backrest assembly by removing the screws (10), washers (15), bushings (20), and washer / spacers (25).
G.  Disassembly of the Seatpan Assembly (Refer to IPL FIG 6)
(1)  
Disconnect the bottom diaphragm assembly (5) from the welded seatpan assembly (45) by disengaging the hook-and-pile fastening (20, -25, -30).

(2)  
Remove the diaphragm support tube (35) from the pivot arms (50, 55) and slide the bottom diaphragm assembly (5) clear off the support tube. Remove the plug caps (40).

(3)  
Remove the bottom diaphragm loop assembly (10) and contour foam pad assembly (15) from the welded seatpan assembly (45).

(4)  
Remove the pivot arms (50, 55) by removing the screws (60), washers (65), and nuts (70).

H. Center Console Removal (Refer to IPL FIG 7)
(1)  
Disconnect and unroute the harnesses.

(2)  
Remove the center console assembly (5) by removing the screws (10) and washers (15).

(3)  
Lift the center console assembly (5) clear off the seat assembly.

Page 3004
B/E AEROSPACE
COMPONENT MAINTENANCE MANUAL
MILLENNIUM. 88813 SERIES

J. Disassembly of the Center Console Assembly (Refer to IPL FIG 8)
(1)  
Remove the heelcap (5) by removing screw (15) and pushing upwards to remove the screws (10) out of the keyways.

(2)  
Remove the armcap assembly (140) from the center console by removing screw      

(150) and sliding the armcap back and lifting away from screws (145).

(3)  
Remove the PCUs (40, -45).

(4)  
Remove the cocktail table assembly (20) by removing screws (35), sliding the cocktail table assembly forward and lifting screws (25) out of the keyways.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：MILLENNIUM™ 88813 SERIES PASSENGER SEATS 旅客座椅(21)