ATA OPERATIONS Area INSPECTIONS
   1st
25 hrs 50
hrs 100
hrs Major Ann. Other
79-00 LUBRICATION       
79-00 General       
79-00 1) Visually inspect the lubrication lines and connections on the engine cases and on the oil cooler(s), check the attach fittings and look for impact marks, wear, cracks and leaks. 100  X X X 0 NOTE 1
79-10 Storage       
79-10 1) Visually inspect the engine oil filler port, the oil gage and the base for leaks, and check attach fittings. 100    X X 
79-20 Oil distribution       
79-20 1) Visually inspect oil cooler(s), support(s),
attach fittings. Look for cracks and evidence of leaks. 100    X X 
79-20 2) Check engine crankcase breather for
obstruction. 100   X X 0 NOTE 1
79-30 Indicating       
79-30 1) Visually inspect attach fittings, lines,
connections, pressure transmitter and oil temperature probe for routing and condition. 000   X X 0 NOTE 1
80-00 STARTING       
80-00 General       
80-00 1) Visually inspect the starter relay (battery at the rear), check the attach fittings, the lugs and the terminal covers. 200    X  
80-00 2) Perform an overhaul of the starter. 100      Associated
with
engine
overhaul

NOTE 1 : If a 100-hr. inspection has been carried out during the last 3 months, do not perform the operations identified with a "0" unless the annual inspection replaces a 100-hr. inspection. For US registered aircraft, perform all operations.
AHAA
Validity : S / N 1 - 9999 05 20-01Page 246
(IA) JUN 01
 

ATA OPERATIONS Area INSPECTIONS
   1st
25 hrs 50
hrs 100
hrs Major Ann. Other
80-00 3) Visually inspect the starter, the attach
fittings and the connections. To adjust the clearance between the toothed ring and the 100     Ix xx x x xx x x xl 
 LYCOMING starter drive gear, refer to the
latest issue of TEXTRON LYCOMING       
 Service Instruction No. 1447.       
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飛機維護手冊 05 時間限制維護檢查 1(98)