ATA OPERATIONS  INSPECTIONS
  Area 1st
25 hrs 50
hrs 100
hrs Major Ann. Other
12-10 3) Fill the fuel tanks and inspect for leaks - refer to 12-11-01 301, 28-10-00 601. 000    X  
 NOTE : Before and during refueling, perform operational tests of
fuel gages - refer to       
 28-40-01 401 and low fuel level
detectors (if installed) - refer to       
 28-40-04 201.       
12-20 Scheduled servicing       
12-20 1) Clean exterior surface. Inspect for corrosion 000   X X X 
 - refer to 12-20-03 201.       
12-20 2) Clean the engine - refer to 12-20-03 201. 000   X X X 
20-00 AIRFRAME STANDARD PRACTICES       
20-00 General       
20-00 1) Reinforce the anticorrosion protection -
refer to 20-00-04 201 and lubricate - refer to 12-21-02 201. 200  X X X X 
20-00 2) Reinforce the anticorrosion protection -
refer to 20-00-04 201 and lubricate - refer to 12-21-05 201. 700   X X X 
20-00 3) Reinforce the anticorrosion protection -
refer to 20-00-04 201 and lubricate - refer to 12-21-04 201. 500   X X X 
20-00 4) Reinforce the anticorrosion protection -
refer to 20-00-04 201 and lubricate - refer to 12-21-04 201. 600   X X X 
20-00 5) Reinforce the anticorrosion protection -
refer to 20-00-04 201 and lubricate - refer to 12-21-01 201. 100  X X X X 
20-00 6) Reinforce the anticorrosion protection -
refer to 20-00-04 201 and lubricate - refer to 12-21-03 201. 300   X X X 
21-00 AIR CONDITIONING       
21-20 Distribution       
21-20 1) Perform an operational test of NACA inlet and air outlet blanking flaps. 200    X X 

NOTE 1 : If a 100-hr. inspection has been carried out during the last 3 months, do not perform the operations identified with a "0" unless the annual inspection replaces a 100-hr. inspection. For US registered aircraft, perform all operations.
AHAA
Validity : S / N 1 - 9999 aeN20 051
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飛機維護手冊 05 時間限制維護檢查 1(59)