曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

No tolerance allowed on an annual inspection.
Tolerances
Major inspection "80A" : Every 2000 hours None 05-20-05
3. INTERPRETATION OF TOLERANCES
The tolerances must be used as follows :
- under no circumstances can the elapsed time between two inspections of the same type exceed the sum of
the "INTERVAL + TOLERANCE", i.e. :
? between VP50 / VP100 maxi = 55 hrs (or 6 months 1/2)
? between two VP100 maxi = 110 hrs
between two 500 hrs special inspections maxi = 550 hrs
between two 1000 hrs special inspections maxi = 1050 hrs
- under no circumstances can the tolerances on level N inspections be accumulated to eliminate a level N-1
inspection,
- to summarize, applying the tolerance to one inspection results in the reduction of the interval before carrying out the next inspection of the same level.
4. ADDITIONAL OPERATIONS
A. Test run-up - refer to 05-30-02
A test run-up, including recording of the parameters, must be carried out at the end of each inspection.
WA
Validity : S / N 1 - 9999 05 20-00Page 1
(BA) JUN 01
 
B. Weighing - refer to 08-00-00
The aircraft must be weighed and its CG calculated :
- after each modification, major repair or change of the internal equipment,
- whenever the aircraft is completely repainted,
- at least every 5 years,
- refer to weighing report in 08-20-00.
C. Compass compensation - refer to 34-20-01
The compass compensation must be checked every 3 years and whenever new electrical or radio equipment is installed.
AAAA
Validity : S / N 1 - 9999 05-20-00 Page 2
(BA) JUN 01
 
FLIGHT HOURS
0 AIRFRAME INSPECTION TYPE
 A - "FIRST 25 HOURS" inspection
 2A - "50 HOURS or 6 months" inspection
25 
50 
 
100 4A - "100 HOURS" inspection
  
150 2A - "50 HOURS or 6 months" inspection
  
200 4A - "100 HOURS" inspection
  
250 2A - "50 HOURS or 6 months" inspection
  
300 4A - "100 HOURS" inspection
  
350 2A - "50 HOURS or 6 months" inspection
  
1950 2A - "50 HOURS or 6 months" inspection
  
2000 80A - "2000 HOURS" inspection - MAJOR INSPECTION
  
2050 2A - "50 HOURS or 6 months" inspection
  
2100 4A - "100 HOURS" inspection
  
 • 
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飛機維護手冊 05 時間限制維護檢查 1(54)