曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

C.  A. D. (AIRWORTHINESS DIRECTIVE) - Issued by the FAA to identify those products which have been found to be in an unsafe condition and the FAA has prescribed inspections and the conditions and limitations, if any, under which those products may continue to be operated.
D.  AIRWORTHINESS - The condition of an item (aircraft, aircraft system or part) that meets its type design in that the item operates in a safe manner to accomplish its intended purpose.
E.  ALTERNATE PART NUMBER - An alternate part number identifies a part, which fully meets its type design in that the item operates in a safe manner to accomplish its intended purpose.
F.  APPROVED PART - A part which has been approved under FAA regulations pursuant to an operator’s engineering/quality assurance specifications applicable for installation on an aircraft or accessory by virtue of it being described, identified and included in design data utilized to establish the type certification, STC, TSO, or PMA.
G.  APIS (APPROVED PRODUCTION INSPECTION SYSTEM) - The system by which a Type Certificate holder is authorized to produce parts without a Production certificate (Ref. FAR Part 21, Subpart F).
H.  APPLIANCE - Any instrument, mechanism, equipment, part, apparatus, appurtenance, or accessory, including communications equipment, that is used or intended to be used in operating or controlling an aircraft in flight, is installed in or attached to the aircraft, and is not part of airframe, engine, or propeller.

I.  APPROVED DATA - Data that has been approved by the Administrator, FAA, and/or a designee as applicable. This may include design, maintenance and quality specifications, or manufacturer’s service bulletins.
J.  ASA - (Aviation Suppliers Association) An independent aviation association dedicated to addressing the concerns and needs of the companies involved with the supply of aviation parts.
K.  AS IS - Any airframe, aircraft engine, propeller, appliance, component part or material, the condition of which cannot certainly and accurately be classified and therefore its status is unknown.
L.  ASSEMBLY - An assembly may be an end item or a component of a higher level assembly. A number of parts, subassemblies, or any combination thereof joined together to perform a specific function and which can be disassembled without destruction of designed use.
M.  ATA - (Airline Transport Association) A trade organization for the principal U.S. Airlines. ATA supports and assist its members by promoting the air transport industry and the safety cost effectiveness, and technological advancement of its operations.
N.  BER - (Beyond Economical Repair) An item that is not economically feasible for restoration to a serviceable condition.
O.  BROKER - One whom for a commission or fee brings parties together and assists in negotiation of a contract between them.
P.  CAA - (Civil Aviation Authority) Responsible for safety, economic regulation, and consumer protection in the aviation industry in the UK.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：AMES MATERIAL SERVICES, INC.PROCEDURES MANUAL(8)