S.C. AEROSTAR  S.A.
FESTIVAL R40S
BACAU - ROMANIA
   AIRPLANE MAINTENANCE MANUAL
dismounting: - check for dents and rubber aging; - check the wear degree of inner pipes.  X  X  X 
4  Visual inspection of wheel tire (check damages, wearing or rubber aging).  X  X  X 
5  Checking the wheel axle and ball bearings (check for wears, plays, check their greasing).  X 
6  Visual inspection of the nose gear control (check its integrity, the condition of the securing elements, check for wearing, check the greasing at joints).  X  X  X 
7  Replacing of rubber shock absorbers.  X 
b) Main gears (see fig. 10; 15; 16) 
1  Visual inspection of main gear fastening on to the fuselage (check the integrity, greasing).  X  X  X 
2  Visual inspection of the shock absorber body (check for damages, distortions and cracks).  X  X  X 
3  Visual inspection of the wheel tire (check for damages, excessive wearing or aging).  X  X  X 
4  Visual inspection of wheel ball bearings (check for damages, plays, and check their greasing).  X 
5  Visual inspection of the main wheel axle, by dismounting the wheel (check its secure fastening, check for cracks).  X  X  X 
6  Visual inspection of the brake system route (check its integrity, fastening, check for any fluid leakage).  X  X  X 

2.5.2. Airframe (see fig. 1; 3; 4; 5; 7; 10; 11; 12; 13; 14; 15;18; 20) 
1  Visual inspection of outer condition (check for damages, cracks, check the condition of protection coats).  X  X  X 
2  Visual inspection of inside area (check for damages, cracks, or loosened assembly elements).  X  X  X 
3  Visual inspection of wing-to-fuselage joint fittings (check for damages, cracks, check the fastening, securing in position).  X  X  X 
4  Visual inspection of fuselage-to- X  X  X 

S.C. AEROSTAR  S.A.
FESTIVAL R40S
BACAU - ROMANIA
   AIRPLANE MAINTENANCE MANUAL
stabilizer joint fittings (check for damages, cracks, check their secure fastening). 
5  Visual inspection of fuselage-to-engine mount joint fittings (check for cracks, check their fastening).  X  X  X 
6  Visual inspection of hinges at control surfaces (check their integrity, fastening, cleanliness, greasing).  X  X  X 
7  Checking the wearing of bolts and joint fitting holes, by removing the items, and measuring the wear.  X 
8  Cleaning the joint bolts and fittings, greasing.  X 
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：FESTIVAL R 40S AIRPLANE MAINTENANCE MANUAL(19)