曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Transparent hose  05-00500  Brake system  2 m (7 ft)  5 years from the date of manufacture 
Transparent hose  05-00500  Anemo-barometric system  2 m (7 ft)  5 years from the date of manufacture 
Rubber hose  300-4  Brake system  2 m (7 ft)  5 years from the date of manufacture 
Hose  MIL-H 6000-8  Oil system  3 m (10 ft)  5 years from the date of manufacture 
Hose  MIL-H 6000-5  Oil system  1.2 m (4 ft)  5 years from the date of manufacture 
Hose  MIL-H 6000-4  Engine cooling system  1 m (3 ft)  5 years from the date of manufacture 

S.C. AEROSTAR  S.A. BACAU - ROMANIA  FESTIVAL R40S   AIRPLANE MAINTENANCE MANUAL 
Hose Filtering element Bushings on nose gear shock absorber  MIL-H 6000-16 RU-0800 XR32-20--1030F  Engine cooling system Engine intake Shock absorber assembly  0.3 m (1 ft) 1 4  5 years from the date of manufacture 100 hours of operation - This lifetime can be reduced, depending on actual operating conditions Depending on technical condition, but not more than 5 years from the date of installation 

2. INSPECTIONS
2.1 Irregular inspections

2.1.1. Current (daily) inspection
Level of certification needed: Owner
It is a visual inspection, carried out whenever the airplane is ready for a flight activity. A complete round of the airplane is performed, checking the following: airframe integrity, any leakage – of fuel, oil, cooling fluid, brake fluid, any clogging of manifold and static pressure intake ports, landing gear fastening, tire inflation degree, fastening of control surfaces, any missing locking devices, canopy and windshield integrity, any dents at the propeller and propeller spinner, propeller fastening to the hub and hub fastening to the axle, secure fastening of cowling, covers and fairing. 
Carry out the inspection, by following the route shown in the picture below:
S.C. AEROSTAR  S.A.
FESTIVAL R40S
BACAU - ROMANIA
   AIRPLANE MAINTENANCE MANUAL

   Inspection route layout 
Carefully check the airplane for any dents, corrosion pits, loosened fasteners, clogging or excessive plays at the control surfaces, check the smooth operation of the control elements, the correct closing of fairing, covers, cowlings and canopy.    
In case of inadequate pressure in the tires, re-inflate them to 36 ± 1.5 psi.
Check the level of the working fluids: fuel, oil, cooling fluid, brake fluid, replenish as necessary and make sure the covers are properly closed.
In the cockpit check the adjustment and securing of seats in position, the smooth operation of the airplane controls (without jamming tendencies), the secure attachment of the airplane instruments,  the integrity of the safety belts, the good operation of the locks, check for any fuel leakage, foreign maters or objects in the airplane, check the secure closing and locking of the canopy.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：FESTIVAL R 40S AIRPLANE MAINTENANCE MANUAL(15)