Page 202 Doc # 6.02.01 09 Jan 2003 Rev. 4
57-60-00
Wings
AMM
3. Repair Data for the Aileron Shells
Figures 2 and 3 show the layers of glass/carbon fiber cloth in the aileron shells. Use this data when you need to repair the aileron.
The Figures show the main layers of cloth. The cross-hatching on the figure shows the orientation of the fibers. The orientation is also given in the related table. When you repair the aileron, you must use the same type of cloth with the same fiber orientation.
The numbers in circles beside each drawing give the order in which the layers are applied (‘Stages’). The first stage is a layer of filler and is not shown. Stage 1 is the outer face of the shell.
Always do a burn test on a piece of composite from the damaged area before you do a repair. Refer to Section 51-20 for the burn test.
Doc # 6.02.01 Page 203
Rev. 4 09 Jan 2003
57-60-00
AMM
10
Item No. Layers Reference No. Type Remarks
2 2 8.4548.60 glass twill 2/2 ±45o
3 1 8.3520.8 carbon ±45o, 270 mm x 1220 mm.
4 1 8.4548.60 glass twill 2/2 ±45o, 270 mm x 520 mm.
5 3 8.3520.8 carbon ±45o, 80 mm x 270 mm.
6 1 H 60 3 mm rigid foam
8 1 8.3520.8 carbon ±45o, 90 mm x 1670 mm.
9 2 8.4548.60 glass twill 2/2 ±45o, 80 mm x 270 mm.
10 8 8.3520.8 carbon ±45o, 80 mm x 270 mm.
11 - 14 8 each 8.3520.8 carbon ±45o, 20 mm x 70 mm.
15 1 8.4548.60 glass twill 2/2 ±45o
Figure 2: Layers of Cloth in the Aileron Bottom Shell
Page 204 Doc # 6.02.01 09 Jan 2003 Rev. 4
57-60-00
Wings
AMM
7
4
Item No. Layers Reference No. Type Remarks
2 2 8.4548.60 glass twill 2/2 ±45o
3 1 8.3520.8 carbon ±45o 300 mm x 1220 mm.
4 1 8.4548.60 glass twill 2/2 ±45o 300 mm x 480 mm.
5 1 H 60 3 mm rigid foam
7 2 8.3520.8 carbon ±45o 40 mm x 80 mm.
8 1 8.4548.60 glass twill 2/2 ±45o
Figure 3: Layers of Cloth in the Aileron Top Shell
57-60-00
AMM
Intentionally left blank
57-60-00
Propeller
AMM
CHAPTER 61
PROPELLER
Doc # 6.02.01 Page 1
Rev. 4 09 Jan 2003
61-TITLE
AMM
Intentionally left blank
61-TITLE
Propeller
AMM
TABLE OF CONTENTS CHAPTER 61 PROPELLER
1. General ..............................................1
Section 61-10 % Propeller Assembly - Lycoming Engine
1.
General ..............................................1
2.
Description............................................1
3.
Operation.............................................2
Trouble-Shooting
1. General ............................................101
Maintenance Practices
1.
General ............................................201
2.
Remove/Install the MTV-12-B/180-17 Propeller ..............201
3.
Propeller Blade Tracking Test ...........................206
4.
Blade Repairs .......................................206
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：鉆石40飛機(jī)維護(hù)手冊 DA 40 SERIES AMM 4(74)
