_______CAUTION:  YOU USE CADMIUM PARTS ON TITANIUM TUBES. DO NOT USE CADMIUM PARTS ON TITANIUM TUBES. CORROSION WILL OCCUR IF 
ILLUSTRATION TUBE JOINING NUMBER* PART TUBE MATERIAL 8  FOR TOOLSREQUIREDREF TABLE C APPROVED SIZES 

 
 (BITE-Type) BACS13AP 1  6061T6  B,C  04, 06, 08, 10, 12 
304 ANN.  B,C  04, 06, 08, 10, 12 
304 1/8 Hard  B,C  04, 06, 08, 10, 12 

 
 BACS13BX (Elastomer Swage) 32  6061T6  A  20 , 24 12, 16, 06, 08, 10, 4 4 
304 ANN.  A  16, 20 
304 1/8 Hard  A  20 , 24 12, 16, 06, 08, 10, 4 4 
21-6-9  A  10, 12, 16 04, 06, 08, 

 
 BACS13BX Swage) (Roller  21-6-9  D  10, 12, 16 04, 06, 08, 
Ti-3Al-2.5V  D  10, 12, 16 04, 06, 08, 

REPAIR METHOD - RECONNECTABLE WITH FLARELESS FITTING SLEEVES
TABLE A

Tube Material and Fitting Selection Tables
Figure 802 (Sheet 1)

L21646
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-10-09
 ALL  ú
 ú  01  Page 838
 ú  Sep 28/00 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL

* SEE TABLE D FOR ASSOCIATED APPROVED FITTINGS.
REPAIR METHOD - RECONNECTABLE WITH FLARELESS FITTING SLEEVES TABLE A
Tube Material and Fitting Selection Tables
Figure 802 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-10-09
 ALL  ú ú 01 Page 839 ú May 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L21647
A
757
MAINTENANCE MANUAL

REPAIR METHOD - PERMANENT UNIONS, TUBE-TO-TUBE
TABLE B

Tube Material and Fitting Selection Tables
Figure 802 (Sheet 3)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-10-09
 ALL  ú ú 01 Page 840 ú May 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L21648
A
757
MAINTENANCE MANUAL

FOR TABLES REF LETTER A AND B  TOOL REQUIRED 
A  Swager No. 5570 Harrison Portable Swagers No. 5175 and 5720 or equivalent stationary 
B  Pressure Presetting Tools ST878D 
C  Hand Presetting Tools ST879A 
D  Harrison Roller Swage Tool Kit 6633K01 
D (1)  Harrison Roller Swaging Machine 6777 
E  ----. . ----Refer to Fig. 825 for individual tool numbers DLT01MAPM1000 (manual, 10,000 psi) is necessary for swaging with No. D12102C06-26A00 for sizes 08,10, and 12 (1/2, 5/8 and 3/4 inch One pump unit, DLT02MAPP1000 (pneumatic, 10,000 psi) or Consult Deutsch for tool kit numbers the tool kits shown. DLT Series with the tool kits shown. One pump unit, Part No. D12025-001, is necessary for swaging No. D12102C11-04 for size 16 (1 inch) No. D12102C03-01A00 for sizes 04 and 06 (1/4 and 3/8 inch) D12000 Series Deutsch Permaswage Kits: 
F  FRK3P02111-001 AMCI: . 
G  None necessary - hand tools only. 
H  Aeroquip Rynglok Kit RTS8-02-006 for sizes 04, 06, 08, 10, 12, 16, 20. 

TOOL REQUIRED FOR REPAIR METHOD
TABLE C

Tube Material and Fitting Selection Tables
Figure 802 (Sheet 4)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-10-09
 ALL  ú
 ú  01  Page 841
 ú  Sep 28/01 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L21649
A
757
MAINTENANCE MANUAL

PART NUMBER  ASSOCIATED APPROVED FITTINGS 
75FITTING NUTS  6UNIONS 
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 STANDARD PRACTICES - AIRFRAME(39)