(a)
ON THE OUTBOARD FLAPS; remove the four bolts (6) and washers (4) that connect the gimbal caps (3).
NOTE: The gimbal retainer (1) and nut (2) must stay in the
____
actuator attach fitting.
(b)
ON THE INBOARD FLAPS; remove the four bolts (6), washers (4 and 8) and nuts (7) that connect the gimbal caps (3) and the actuator attach fitting.
(c)
Remove the gimbal caps (3) from the ball screw nut.
(d)
Adjust the ball and screw support tool to get access to the actuator attach fitting.
NOTE: Make sure that you support the ball screw during the
____ adjustment. The ball screws at positions No. 1, 2, 7 and 8 weigh approximately 40 pounds. At positions No. 3 and 6 they weigh approximately 70 pounds. At positions No. 4 and 5 they weigh approximately 90 pounds.
(e) ON THE OUTBOARD FLAPS; remove the flap attach fitting as follows (Fig. 402, View C): 1) Remove the bolts and cover (9). 2) Remove the cotter pin (10), nut (11), thrust bearing (12),
shims (13) and flap attach fitting assembly (15).
NOTE: Do not remove bearings from fitting assembly (15)
____ unless repair or replacement makes it necessary (OHM 57-52-55).
(f) ON THE INBOARD FLAPS; remove the flap attach fitting as follows (Fig. 402, View D): 1) Remove the nut (22), washer (23), bolt (16), plate
assembly (17) and lock caps (18).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-46
ALL ú ú 03 Page 409 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
2) Remove the shims (19), filler (20) and actuator attach fitting assembly (21).
NOTE: Do not remove the bearings from the actuator attach
____ fitting assembly (21) unless repair or replacement makes it necessary (OHM 57-52-35).
TASK 27-51-46-404-014
3. Actuator Attach Fitting Installation____________________________________
A. Special Tools and Equipment
(1)
2MIT65B81117-1 Ball and Screw Support Tool
(2)
24ME65B00116 Inboard TE Flap Lock
(3)
23ME65B00116 Outboard TE Flap Lock
B.
Consumable Materials
(1)
C00528 Compound - Soft Filmed (corrosion preventive), MIL-C-11796, Class 3
(2)
D00633 Grease - BMS 3-33 (recommended)
(3)
D00013 Grease - MIL-G-23827 (alternative)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-46
ALL ú ú 01 Page 410 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
C. Parts ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 402 | 1 | Retainer (Track No. 1 and 8) | 27-51-33 | 03 | 45 | | | | Retainer (Track No. 2 and 7) | | 02 | 45 | | | 2 | Nut (Track No. 1 and 8) | | 03 | 40 | | | | Nut (Track No. 2 and 7) | | 02 | 40 | | | 3 | Cap Assy - Gimbal (Track No. 1 | | 03 | 50 | | | | and 8) | | | | | | | Cap Assy - Gimbal (Track No. 2 | | 02 | 50 | | | | and 7) | | | | | | | Cap Assy - Gimbal (Track No. 3 | | 01 | 30 | | | | and 6) | | | | | | | Cap Assy - Gimbal (Track No. 4 | | 04 | 30 | | | | and 5) | | | | | | 4 | Washer (Track No. 1 and 8) | | 03 | 35 | | | | Washer (Track No. 2 and 7) | | 02 | 35 | | | | Washer (Track No. 3 and 6) | | 01 | 40 | | | | Washer (Track No. 4 and 5) | | 04 | 40 | | | 5 | Ballscrew Assy (Track No. 1 and 8)| | 03 | 90 | | | | Ballscrew Assy (Track No. 2 and 7)| | 02 | 90 | | | | Ballscrew Assy (Track No. 3 and 6)| | 01 | 90 | | | | Ballscrew Assy (Track No. 4 and 5)| | 04 | 90 | | | 6 | Bolt (Track No. 1 and 8) | | 03 | 30 | | | | Bolt (Track No. 2 and 7) | | 02 | 30 | | | | Bolt (Track No. 3 and 6) | | 01 | 35 | | | | Bolt (Track No. 4 and 5) | | 04 | 35 | | | 7 | Nut (Track No. 3 and 6) | | 01 | 50 | | | | Nut (Track No. 4 and 5) | | 04 | 50 | | | 8 | Washer (Track No. 3 and 6) | | 01 | 45 | | | | Washer (Track No. 4 and 5) | | 04 | 45 | | | 9 | Cover | 27-51-04 | 10 |895, 905 | | | 10 | Cotter Pin | | 10 | 915 | | | 11 | Nut | | 10 | 920 | | | 12 | Bearing | | 10 | 923 | | | 13 | Shim | | 10 | 925 | | | 14 | Housing | | 10 | 927 | | | 15 | Fitting Assy (Track No. 2 and 7) | | 10 | 950 | | | | Fitting Assy (Track No. 1 and 8) | | 10 | 960 | 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 6(8)
