D.
Do the Operational Test
S 715-010
(1)
Do a test of DCIR No. 1.
(a)
Open this circuit breaker for the main TRU No. 1:
1) P6, Main Power Distribution Panel a) 6A5, TRU 1
(b)
Make sure that DC-VOLTS 1, 2, 3, and 4 are approximately 28 volts.
(c)
Push the BUS TIE 1 switch to ISLN.
(d)
Make sure the ISLN light comes on.
(e)
Make sure that DC-VOLTS 1 is approximately 0 volts.
(f)
Make sure that DC-VOLTS 2, 3, and 4 are approximately 28 volts.
(g)
Push the BUS TIE 1 switch to AUTO.
(h)
Make sure the ISLN light goes off.
(i)
Close this circuit breaker for the main TRU No. 1:
1) P6, Main Power Distribution Panel a) 6A5, TRU 1
(j)
Make sure that DC-VOLTS 1, 2, 3, and 4 are approximately 28 volts.
S 715-033
(2)
Do a test of DCIR No. 2.
(a)
Open this circuit breaker for the main TRU No. 2:
1) P6, Main Power Distribution Panel a) 6A14, TRU 2
(b)
Make sure that DC-VOLTS 1, 2, 3, and 4 are approximately 28 volts.
(c)
Push the BUS TIE 2 switch to ISLN.
(d)
Make sure the ISLN light comes on.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
24-30-00
ALL ú ú 01 Page 509 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
(e)
Make sure that DC-VOLTS 2 is approximately 0 volts.
(f)
Make sure that DC-VOLTS 1, 3, and 4 are approximately 28 volts.
(g)
Push the BUS TIE 2 switch to AUTO.
(h)
Make sure the ISLN light goes off.
(i)
Close this circuit breaker for the main TRU No. 2:
1) P6, Main Power Distribution Panel
a) 6A14, TRU 2
(j)
Make sure that DC-VOLTS 1, 2, 3, and 4 are approximately 28 volts.
S 715-012
(3)
Do a test of DCIR No. 3.
(a)
Open this circuit breaker for the main TRU No. 3:
1) P6, Main Power Distribution Panel
a) 6A23, TRU 3
(b)
Make sure that DC-VOLTS 1, 2, 3, and 4 are approximately 28 volts.
(c)
Push the BUS TIE 3 switch to ISLN.
(d)
Make sure the ISLN light comes on.
(e)
Make sure that DC-VOLTS 3 is approximately 0 volts.
(f)
Make sure that DC-VOLTS 1, 2, and 4 are approximately 28 volts.
(g)
Push the BUS TIE 3 switch to AUTO.
(h)
Make sure the ISLN light goes off.
(i)
Close this circuit breaker for the main TRU No. 3:
1) P6, Main Power Distribution Panel
a) 6A23, TRU 3
(j)
Make sure that DC-VOLTS 1, 2, 3, and 4 are approximately 28 volts.
S 715-037
(4)
Do a test of DCIR No. 4.
(a)
Open this circuit breaker for the main TRU No. 4:
1) P6, Main Power Distribution Panel
a) 6A32, TRU 4
(b)
Make sure that DC-VOLTS 1, 2, 3, and 4 are approximately 28 volts.
(c)
Push the BUS TIE 4 switch to ISLN.
(d)
Make sure the ISLN light comes on.
(e)
Make sure that DC-VOLTS 4 is approximately 0 volts.
(f)
Make sure that DC-VOLTS 1, 2, and 3 are approximately 28 volts.
(g)
Push the BUS TIE 4 switch to AUTO.
(h)
Make sure the ISLN light goes off.
(i)
Close this circuit breaker for the main TRU No. 4:
1) P6, Main Power Distribution Panel
a) 6A32, TRU 4
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
24-30-00
ALL ú ú 01 Page 510 ú Feb 18/01
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 ELECTRICAL POWER 電源 2(45)
