曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

______________________________________________
 1.  General_______
 A.  There are two tasks in this subject. The first task is for the removal of the inertial reference system (IRS) master caution unit (MCU). The second task is for the installation of the IRS MCU.
 B.  The IRS MCU is installed on the P10 panel.
 C.  See 20-40-12/201, Electrostatic Discharge Sensitive Devices for the correct procedure to remove or install the IRS MCU.
 TASK 34-28-51-004-018
 2.  IRS Master Caution Unit Removal_______________________________
 A.  References
 (1) AMM 20-40-12/201 Electrostatic Discharge Sensitive Devices
 B.  Access
 (1)  Location Zones
 102 Control Cabin - Right

 C.  Procedure
 S 864-001
 (1)  
Set the two switches on the IRS mode select unit (MSU) to the OFF position.

 S 864-002

 (2)
Open these circuit breakers and attach DO-NOT-CLOSE tags:

 (a)  
P6 Circuit Breaker Panel
 1) DAA/FMC NO. 2 AC
 2) DAA/IRS NO. 2
 3) IRS NO. 2 AC
 4) DAA NO. 2 DC
 5) DAA/FMC NO. 2 DC
 6) IRS NO. 2 DC

 (b)  
P18 Circuit Breaker Panel
 1) DAA/FMC 1 - AC
 2) DAA/IRS 1 - AC

 

 

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-28-51

 ALL  ú ú 01 Page 401 ú Nov 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 3) IRS 1 - AC
 4) DAA 1 - DC
 5) DAA/FMC 1 - DC
 6) IRS 1 - DC

 S 024-009
 (3)  Remove the IRS MCU (AMM 20-40-12/201).
 (a)  
Release the fasteners on the front of the IRS MCU.

 CAUTION:_______CAREFULLY REMOVE THE IRS MCU FROM THE PANEL. TOO MUCH FORCE CAN CAUSE DAMAGE TO THE ELECTRICAL CABLES ON THE REAR OF THE IRS MCU.

 (b)  
Carefully remove the IRS MCU from the panel until you can get at the electrical connectors.

 (c)  
Disconnect the electrical connectors from the rear of the IRS MCU.

 (d)  
Identify the electrical connectors for the installation.

 TASK 34-28-51-404-019
 3.  IRS Master Caution Unit Installation____________________________________
 A. References
 (1)  
AMM 20-40-12/201, Electrostatic Discharge Sensitive Devices

 (2)  
AMM 24-22-00/201, Manual Control

 B. Access
 (1)  Location Zones
 102 Control Cabin - Right

 C. Procedure
 S 864-011
 (1)  Make sure these circuit breakers are open with DO-NOT-CLOSE tags attached:
 (a)  P6 Circuit Breaker Panel
 1) DAA/FMC NO. 2 AC
 2) DAA/IRS NO. 2
 3) IRS NO. 2 AC
 4) DAA NO. 2 DC

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-28-51

 ALL  ú ú 01 Page 402 ú Nov 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 5) DAA/FMC NO. 2 DC
 6) IRS NO. 2 DC

 (b)  P18 Circuit Breaker Panel
 1) DAA/FMC 1 - AC
 2) DAA/IRS 1 - AC
 3) IRS 1 - AC
 4) DAA 1 - DC
 5) DAA/FMC 1 - DC
 6) IRS 1 - DC

 S 424-013
 (2)  Install the IRS MCU (AMM 20-40-12/201).
 (a)  
Connect the electrical connectors to the IRS MCU.

 CAUTION:_______CAREFULLY INSTALL THE IRS MCU INTO THE PANEL. TOO MUCH FORCE CAN CAUSE DAMAGE TO THE ELECTRICAL CABLES AT THE REAR OF THE IRS MCU.

 (b)  
Carefully install the IRS MCU into the panel.

 (c)  
Lock the fasteners on the front of the IRS MCU.

 S 864-015
 (3)  Remove the DO-NOT-CLOSE tags and close these circuit breakers:
 (a)  
P6 Circuit Breaker Panel
 1) DAA/FMC NO. 2 AC
 2) DAA/IRS NO. 2
 3) IRS NO. 2 AC
 4) DAA NO. 2 DC
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 導航 NAVIGATION 2(93)