C. Procedure
S 864-030
WARNING: YOU MUST RELEASE THE PRESSURE IN THE RAIN REPELLENT SYSTEM
_______ BEFORE YOU DISCONNECT ANY PLUMBING CONNECTIONS. IF THERE IS PRESSURE IN THE SYSTEM, FLUID CAN SUDDENLY COME OUT WHEN YOU LOOSEN A CONNECTION. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(1)
Do this task: "Release the Pressure in the Rain Repellent System" (Ref 30-43-00/201).
S 864-002
(2)
Open these circuit breakers and attach DO-NOT-CLOSE tags:
(a) P18 Panel
1) RAIN REPELLENT L
2) RAIN REPELLENT R
S 864-003
(3) Set the the shutoff valve at the rain repellent container to the horizontal (closed) position.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
30-43-11
ALL ú ú 02 Page 401 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 014-028
(4) Lower the pilot's instrument panel to get access to the tubing for the spray nozzle assembly.
S 024-034
WARNING:_______DO NOT LET RAIN REPELLENT FLUID TOUCH YOUR SKIN OR EYES. THE FLUID CAN CAUSE IRRITATION. DO NOT BREATHE THE FUMES. IF THE FLUID TOUCHES YOU, WASH YOUR SKIN OR EYES WITH WATER.
(5) Remove the spray nozzle:
(a)
Loosen the jamnut on the spray nozzle assembly.
(b)
Remove the nozzle and the jamnut.
(c)
Remove the nut and washer that hold the bulkhead fitting to the airplane structure.
(d)
Loosen the jamnut that locks the bulkhead fitting to the solenoid valve.
(e)
Remove the bulkhead fitting.
(f)
Remove the O-ring, the backup ring, the jamnut, and the seal from the bulkhead fitting.
TASK 30-43-11-404-014
3. Rain Repellent Spray Nozzle Installation (Fig. 401)________________________________________
A. Consumable Materials
(1) A00000 Primer - BMS 10-11, Type 1
B. References
(1) 24-22-00/201, Manual Control
C. Access
(1) Location Zone
101 Control Cabin - Left
102 Control Cabin - Right
D. Procedure
S 434-031
(1) Assemble the bulkhead fitting to the solenoid valve:
(a)
Install the seal on the top of the bulkhead fitting.
(b)
Install the jamnut, backup ring, and the O-ring on the lower end of the bulkhead fitting.
(c)
Attach the bulkhead fitting to the valve.
(d)
Tighten the jamnut on the spray nozzle assembly.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
30-43-11
ALL ú ú 01 Page 402 ú Nov 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
NOZZLE
Rain Repellent Spray Nozzle Installation
Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
30-43-11
ALL ú ú 01 Page 403 ú Jul 15/91
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 防冰和排雨(94)
