30-42-00
ALL ú ú 01 Page 502 ú Mar 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
WINDSHIELD WIPER ASSEMBLY - REMOVAL/INSTALLATION
________________________________________________
1. General_______
A. This procedure contains two tasks:
(1)
The removal of a windshield wiper assembly
(2)
The installation of a windshield wiper assembly.
TASK 30-42-11-004-001
2. Windshield Wiper Assembly Removal (Fig. 401)_________________________________
A. References
(1)
IPC 30-42-11 Fig. 03
(2)
SSM 30-42-00
(3)
WDM 30-42-01
B. Access
(1) Location Zone
101 Control Cabin - Left
102 Control Cabin - Right
C. Procedure
S 864-002
(1) Open these circuit breakers and attach DO-NOT-CLOSE tags:
(a) On the P18 panel
1) WIPERS-LEFT
2) WIPERS-RIGHT
S 034-027
CAUTION: MAKE SURE THAT YOU DISCARD THE ADJUSTMENT NUT AND THE TEE BOLT.
_______ THE WIPER BLADE CAN BECOME LOOSE IF YOU USE THE ADJUSTMENT NUT AND TEE BOLT AGAIN.
(2) Remove the adjustment nut and the tee bolt from the wiper arm and discard them.
S 034-004
CAUTION:_______MAKE SURE THAT YOU DISCARD THE NUT. THE WIPER BLADE CAN BECOME LOOSE IF YOU USE THE NUT AGAIN.
(3) Remove the nut that attaches the wiper blade to the wiper arm and discard it.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
30-42-11
ALL ú ú 02 Page 401 ú Jul 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
2-3 LBS OF FORCE A
A
SEE A
SEE B
DISK (WITH SERRATIONS) PARK POSITION A 1
WIPER BLADE BLADE NUT WIPER ARM
SILL BEAM 23 |1` WIPER ARM ADJUSTMENT NUT CONVERTER SHAFT
CONVERTER SHAFT ARM ATTACH BOLT ADJUSTMENT SLEEVE (WITH SERRATIONS) WINDSHIELD WIPER BLADE (IN THE PARK POSITION) B CLAMP BOLT
PARK POSITION A 2
1 2 FORCE SUPPLIED SUPPLIED SHOWN WITH THE 2-3 POUND SHOWN WITHOUT THE FORCE WINDSHIELD A-A FRAME 0.06 INCH
Figure 401 Windshield Wiper Assembly Installation
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
30-42-11
ALL ú ú 02 Page 402 ú Mar 15/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 024-005
CAUTION:_______DO NOT LET THE WIPER ARM HIT THE WINDSHIELD. DAMAGE TO THE WINDSHIELD OR THE WIPER ARM CAN OCCUR.
(4)
Remove the wiper blade from the wiper arm.
S 034-006
(5)
Turn the screw that holds the adjustment sleeve to make the sleeve loose.
S 034-007
(6)
Remove the bolt that holds the wiper arm to the converter shaft.
S 024-008
(7)
Remove the wiper arm.
TASK 30-42-11-404-009
3. Install the Windshield Wiper Assembly (Fig. 401)_____________________________________
A. Standard Tools and Equipment
(1) Spring scale that can measure a 2 to 3 pound force.
B. Consumable Materials
(1) D00346 Grease - MIL-G-23827
C. References
(1)
24-22-00/201, Manual Control
(2) 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 防冰和排雨(80)
