(b)  
Make sure the L VALVE OPEN light is on brightly and continuously.

 (c)  
Connect the D732 electrical connector to the left wing TAI valve.

 (d)  
Make sure the L VALVE OPEN light is on dimly and continuously.

 S 725-009
 (8)  Do this test of the TAI valve indication for the right wing.
 (a)  
Disconnect the D734 electrical connector from the right wing TAI valve.

 (b)  
Make sure the R VALVE OPEN light is on brightly and continuously.

 (c)  
Connect the D734 electrical connector to the right wing TAI valve.

 (d)  
Make sure the R VALVE OPEN light is on dimly and continuously.

 S 715-010
 (9)  Make sure the wing TAI valves close correctly.
 (a)  
Put the WING ANTI-ICE switch in the OFF position.

 (b)  
Make sure the L VALVE OPEN and R VALVE OPEN lights come on brightly for 1 to 3 seconds.

 (c)  
Make sure the L VALVE OPEN and R VALVE OPEN lights go off.

 (d)  
Make sure the wing TAI valves close.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 30-11-11
 ALL  ú ú 03 Page 502 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 865-011
 (10)
 Install the access panels (AMM 12-30-00/201).

 S 865-012

 (11)
 Remove electrical power if it is not necessary (AMM 24-22-00/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 30-11-11
 ALL  ú ú 02 Page 503 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 WTAI SOLENOID VALVE - REMOVAL/INSTALLATION
__________________________________________
 1.  General_______
 A.  This procedure contains two tasks. The first task removes the solenoid valve for the wing thermal anti-ice (WTAI). The second task installs the solenoid valve for the WTAI.
 B.  The airplane must be in the condition that follows for the WTAI solenoid valve to operate:
 (1)  
The airplane must be on the ground.

 (2)  
The WING ANTI-ICE switch, on the P5 panel, must be in the ON position.

 C.  The removal and the installation of the WTAI solenoid valve is the same for each engine.
 TASK 30-11-13-004-001
 2.  WTAI Solenoid Valve Removal (Fig. 401)___________________________
 A.  References
 (1)  36-05-00/201, Pneumatic System
 B.  Access
 (1)  
Location Zones
 101/102 Control Cabin
 507 Strut - Left Nacelle
 607 Strut - Right Nacelle

 (2)  
Access Panels
 5728/5828 Access Door Strut

 C.  Prepare to Remove the WTAI Solenoid Valve
 S 864-002
 (1)  
Put the start lever for the engine to the CUT-OFF position and attach a DO-NOT-OPERATE tag.

 (2)
Remove the pressure from the pneumatic system (Ref 36-05-00/201).

 S 864-004

 (3)  
Put the WING ANTI-ICE switch, on the P5 panel, to the OFF position and attach a DO-NOT-OPERATE tag.

 S 014-005

 (4)  
Open the access panel for the applicable engine.

 S 864-003
 D.  Remove the WTAI Solenoid Valve
 S 034-006
 (1) Remove the ground strap at the bonding tab on the solenoid valve.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 30-11-13
 ALL  ú ú 01 Page 401 ú Nov 15/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 防冰和排雨(19)