(2)
Fuel/water samples taken from each fuel tank should be tested with a microbial contamination kit. Positive results for microbial contamination require action which can include a biocide treatment or physical removal of microbial growth from fuel tanks.
(3)
All instructions supplied with the detection kits should be followed closely. Variations in the fuel/water sample and the ability of the detection kits to consistently measure the level of microbial growth make it important to retest if a detection test shows microbial contamination. Do not compare the test results between the different types of detection kits.
B. Equipment
(1)
Microbial ContaminationTest Kits;
Use one of these:
(a)
MicrobMonitor2
Hemel Hempstead, UK
Tel: +44 (0) 1442 225711
Fax: +44 (0) 1442 223960
Email: microbmonitor2@bp.com
(b)
Easicult Combi
Orion Diagnostica (Manufacturer)
P.O.
Box 83 02101 Espoo, Finland
Tel: 358-9-429-2888
Fax: 358-9-429-2794
or Metalworking Chemicals & Equipment Co., Inc
P.O.
Box 990, 34 Main Street, Lake Placid
New York USA 12946
Tel: (518)-523-2355
Fax: (518) 523-2821
(c)
FUELSTAT Resinae
Conidia Bioscience (Manufacturer)
Bakeham Lane, Egham, Surrey, TW20 9TY, UK
Tel: +44 (0) 1491 829012
Fax: +44 (0) 1491 829100
Email: info@conidia.com
(2)
Sump drain tool
(3)
Sump drain container
(4)
Fuel sample bottle - glass or fuel resistant plastic
(5)
Protective equipment:
(a)
Eye protection
(b)
Gloves - clean, fuel resistant
(c)
Protective outerwear - clean
500
Sep 01/02 BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details. 28-11-0 Page 201
C. Consumable Materials
(1)
Isopropyl alcohol
(2)
Cloths - clean, lint-free
D. Prepare to Do the Detection Test for Microbial Contamination
(1)
Clean the sump drain tool, container and fuel sample bottle with a solution of 1 part tap water to 3-4 parts isopropyl alcohol.
NOTE: This will help prevent the possibility of cross contamination when you take the fuel samples.
(2)
Clean the exterior area of the sump drain with clean, lint-free cloths soaked with a solution of 1 part tap water to 3-4 parts isopropyl alcohol.
(3)
Air dry the fuel sampling equipment and sump drain areas.
E. Collect the Fuel Sample
NOTE: Collect individual fuel samples separately from each fuel tank.
(1)
Make sure the sump drain container is clean and dry.
(2)
Get a water/fuel sample from the fuel sump drain (minimum of 1 liter).
(3)
Make sure the fuel sample bottle is clean and dry.
(4)
Pour collected fuel into the fuel sample bottle, making sure the fuel sample contains visible water (free water) and fuel.
NOTE: Do not add any additives, such as food coloring to determine the presence of water.
(5)
Write the date, time, aircraft number and fuel tank identification on a label on each sample.
(6)
Protect each sample from contamination.
28-11-0 Sep 01/02 Page 202
F. Microbiological Detection Test
(1)
Test the sample within 6 hours of collection if possible, but no more than within 24 hours of collection.
NOTE: After you collect the test sample, any microbial contamination in the sample will start to die.
(2)
Use one of the approved test kits to test the fuel samples.
(a) Follow all instructions supplied with the test kit.
NOTE: Some test kits will not function correctly if fuel is tested. Even traces of fuel can coat the test slide and prevent the microbes from growing. Other kits can test either fuel or free water, but free water is recommended.
(3)
Use the data supplied with the test kit and analyze the level of contamination.
(4)
Record the test results.
G. Test Results
(1)
If the test results show the presence of microbial contamination, get a new fuel/water sample within 10-14 days of test results and repeat the microbial detection test with the same test method.
(2)
If the retest also shows heavy microbial contamination (as defined by the test kit), within 10 days after the test results, do these steps:
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737 AMM 飛機維護手冊 燃油 FUEL(43)
