- do a check and repair the wiring between: LDG SIGNAL-RELAY 13LV conn. A/A and LT-STROBE SW 11LV conn. 2B, LDG SIGNAL-RELAY 13LV conn. A/1 and GND, LDG SIGNAL-RELAY 13LV conn. A/Z and GND, LDG SIGNAL-RELAY 13LV conn. A/X and LGCIU 2 AA/14A (Ref. ASM 33-48/01).
B. Do the test as given in the Para. 3.A .
5. Close-up
________
A. Put the aircraft back to its initial configuration.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞33-48-00∞∞∞∞∞∞∞∞∞∞Page 202
May 01/04 CES
TASK 33-48-00-810-802
Strobe Lights - One of the Anti-Collision Strobe Lights does not flash
1. Possible Causes
_______________
- PWR SPLY UNIT-L WING TIP STROBE LIGHT 631 (15LV)
- PWR SPLY UNIT-WING TIP STROBE LIGHT 632 (14LV)
- PWR SPLY UNIT-TAIL CONE STROBE LIGHT (18LV)
- LIGHT-STROBE, L WING TIP 17LV
- PWR SPLY-RELAY 12LV
- wiring
- LIGHT-STROBE, R WING TIP 16LV
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 33-48-00-710-002 Operational Test of the Anti-Collision/Strobe
Lighting
AMM 33-48-13-000-001 Removal of the Tail Cone Strobe-Light (19LV)
AMM 33-48-13-400-001 Installation of the Tail Cone Strobe-Light (19LV)
AMM 33-48-14-000-001 Removal of the Strobe Light
AMM 33-48-14-400-001 Installation of the Strobe Light
AMM 33-48-38-000-001 Removal of the Power Supply Unit
AMM 33-48-38-400-001 Installation of the Power Supply Unit
ASM 33-48/01
3. Fault Confirmation
__________________
A. Do the operational test of the Anti-Collision/Strobe Lighting and confirm that one of the strobe lights does not flash (Ref. AMM TASK 33-48-00-710-002).
4. Fault Isolation
_______________
A. If the test confirms the fault in the LH WING TIP STROBE:
- replace the LIGHT-STROBE, L WING TIP 17LV (Ref. AMM TASK 33-48-14-000-001) and (Ref. AMM TASK 33-48-14-400-001).
(1) If the fault continues:
- replace the PWR SPLY UNIT-L WING TIP STROBE LIGHT 631 (15LV) (Ref. AMM TASK 33-48-38-000-001) and (Ref. AMM TASK 33-48-38-400-001).
(2) If the fault continues:
- do a check of the PWR SPLY-RELAY 12LV and replace it if necessary.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞33-48-00∞∞∞∞∞∞∞∞∞∞Page 203
Feb 01/98 CES (3) If the fault continues:
- do a check and repair the wiring between: CB 10LV conn. A2 and PWR SPLY-RELAY 12LV conn. A/A2, CB 10LV conn. B2 and PWR SPLY-RELAY 12LV conn. A/B2, CB 10LV conn. C2 and PWR SPLY-RELAY 12LV conn. A/C2,
PWR SPLY-RELAY 12LV conn. A/A1 and PWR SPLY UNIT 15LV conn. A/1,
PWR SPLY-RELAY 12LV conn. A/B1 and PWR SPLY UNIT 15LV conn. A/2,
PWR SPLY-RELAY 12LV conn. A/C1 and PWR SPLY UNIT 15LV conn. A/3,
GND and PWR SPLY UNIT 15LV conn. A/12,
GND and PWR SPLY UNIT 15LV conn. A/14,
PWR SPLY-UNIT 15LV conn. B/1 and STROBE LIGHT 17LV conn. A/1,
PWR SPLY-UNIT 15LV conn. B/2 and STROBE-LIGHT 17LV conn. A/2,
PWR SPLY-UNIT 15LV conn. B/3 and STROBE-LIGHT 17LV conn. A/3 (Ref.
ASM 33-48/01).
B. If the test confirms the fault in the RH WING TIP STROBE:
- replace the LIGHT-STROBE, R WING TIP 16LV (Ref. AMM TASK 33-48-14-000-001) and (Ref. AMM TASK 33-48-14-400-001).
(1) If the fault continues:
- replace the PWR SPLY UNIT-WING TIP STROBE LIGHT 632 (14LV) (Ref. AMM TASK 33-48-38-000-001) and (Ref. AMM TASK 33-48-38-400-001).
(2) If the fault continues:
- do a check of the PWR SPLY-RELAY 12LV and replace it if necessary.
(3) If the fault continues: 中國航空網(wǎng) m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 LIGHTS 燈光(70)
