「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : 401-499, ∞∞33-24-00∞∞∞∞∞∞∞∞∞∞Page 304
 Aug 01/05 CESR Lavatory Lighting - Schematic R Figure 301B (SHEET 2)

 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : 401-499, ∞∞33-24-00∞∞∞∞∞∞∞∞∞∞Page 305
 Aug 01/05 CES

 PASSENGER READING LIGHTS - FAULT ISOLATION PROCEDURES
_____________________________________________________
 TASK 33-25-00-810-801
 Reading Light - One Reading Light does not come on
 1. Possible Causes
_______________
 - LAMP

 - FUSE

 - READING LIGHT POWER UNIT

 - PCB 2038VUA

 - DEU-A

 - wiring

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 23-73-38-000-001 Removal of the Power Unit for the Passenger Reading Light AMM 23-73-38-400-001 Installation of the Power Unit for the Passenger Reading Light AMM 23-73-38-960-002 Replacement of the Power Unit Fuses for the Passenger
 Reading Light AMM 23-73-46-000-001 Removal of the Decoder/Encoder Unit (DEU) A 200RH AMM 23-73-46-400-001 Installation of the Decoder/Encoder Unit (DEU) A
 200RH R AMM 23-73-49-000-001 Removal of the Printed Circuit Board (PCB) with the R Bulbs or LEDs R AMM 23-73-49-400-001 Installation of the Printed Circuit Board (PCB) with R the Bulbs or LEDs
 AMM 23-73-64-000-001 Removal of the Reading Light
 AMM 23-73-64-400-001 Installation of the Reading Light
 AMM 33-25-00-710-001 Operational Test of the Passenger Reading

 Light-System
 ASM 23-73/13
 ASM 33-25/01

 3. Fault Confirmation
__________________
 A. Do the CIDS1/READING/WORK-LIGHTS test through the CFDS.
 B. Do the operational test of the passenger reading-light system (Ref. AMM TASK 33-25-00-710-001).
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞33-25-00∞∞∞∞∞∞∞∞∞∞Page 201
 May 01/05 CES

 4. Fault Isolation
_______________

 A. If the operational test gives the maintenance message RDG LIGHT XX L, R (XX seat row) and the related lamp does not come on:
 - replace the LAMP (Ref. AMM TASK 23-73-64-000-001) and (Ref. AMM TASK 23-73-64-400-001).
 (1) If the fault continues:
 - replace the related FUSE (Ref. AMM TASK 23-73-38-960-002).
 (a) If the fault continues:
 - replace the related READING LIGHT POWER UNIT (Ref. AMM TASK 23-73-38-000-001) and (Ref. AMM TASK 23-73-38-400-001).
 1_ If the fault continues:
 - replace the related PCB 2038VUA (Ref. AMM TASK 23-73-49-000-
001) and (Ref. AMM TASK 23-73-49-400-001).

 B. If the operational gives the maintenance message RDG LIGHT XX L, R and the lamp comes on:
 - replace the related DEU-A (Ref. AMM TASK 23-73-46-000-001) and (Ref. AMM TASK 23-73-46-400-001).
 (1) If the fault continues:
 - do a check and repair the wiring between the related: READING-LIGHT POWER UNIT conn. A/H and DEU-A conn. C/35 (Page 101) READING-LIGHT POWER UNIT conn. A/H and DEU-A conn. C/42 (Page 102) READING-LIGHT POWER UNIT conn. A/H and DEU-A conn. C/28 (Page 103) READING-LIGHT POWER UNIT conn. A/B and GND (Ref. ASM 23-73/13) and (Ref. ASM 33-25/01).
 C. Do the test as given in the Para. 3.A.
 5. Close-up
________
 A. Put the aircraft back to its initial configuration.
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞33-25-00∞∞∞∞∞∞∞∞∞∞Page 202
 May 01/05R
 CES

 TASK 33-25-00-810-802

 Reading Light - Fault in the Printed Circuit Board (PCB) of the Reading Lights
 1. Possible Causes_______________
 - READING-LIGHT POWER UNIT - PCB 2038VUA - DEU-A - wiring
 2. Job Set-up Information______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 LIGHTS 燈光(43)