- A connector with a 7.5 ohm, 5 watt resistor

 - A serviceable escape slide.
 The subsequent procedure describes the connection of a
 serviceable escape slide.

 (a) Do the subsequent procedures:

 - remove the ESCAPE SLIDE FWD L (7500MM) (Ref. AMM TASK 25-62-44-000-002).

 - connect a serviceable escape slide electrically only.

 (b) If the fault does no longer exist:

 - install the serviceable escape slide (Ref. AMM TASK 25-62-44-400-001).

 (c) If the fault continues:

 - connect the removed ESCAPE SLIDE FWD L (7500MM) electrically only.

 - remove the ESCAPE SLIDE FWD R (7501MM) (Ref. AMM TASK 25-62-44-000-002).

 - connect a serviceable escape slide electrically only.

 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 004-049, 053-099, 101-105, 151-199, ∞∞33-51-00∞∞∞∞∞∞∞∞∞∞Page 258
 201-299, May 01/05 CES

 (d) If the fault does no longer exist:

 - install the serviceable escape slide (Ref. AMM TASK 25-62-44-400-001).

 - install the old ESCAPE SLIDE FWD L (7500MM) (Ref. AMM TASK 25-62-44-000-001).

 (e) If the fault continues:

 - do a check and repair the wiring between: escape slide connector 2870VC pin A and EPSU (10WL) pin F, escape slide connector 2870VC pin B and GND, PROX SW-HANDLE, R FWD ESC SLIDE (4WN2) pin E and EPSU (10WL) pin S, PROX SW-HANDLE, R FWD ESC SLIDE (4WN2) pin F and GND, PROX SW-HANDLE, R FWD PAX/CREW DOOR (13WV2) pin E and EPSU (10WL) pin <K, PROX SW-HANDLE, R FWD PAX/CREW DOOR (13WV2) pin F and GND (Ref. ASM 33-51/01) and (Ref. AWM 33-51-04).

 (f) If the fault does no longer exist:

 - install the removed ESCAPE SLIDE FWD R (7501MM) again (Ref. AMM TASK 25-62-44-400-001).

 - install the old ESCAPE SLIDE FWD L (7500MM) (Ref. AMM TASK 25-62-44-000-001).

 (g) If the fault continues:

 - do a check and repair the wiring between: escape slide connector 2871VC pin A and EPSU (10WL) pin T, escape slide connector 2871VC pin B and GND, PROX SW-HANDLE, L FWD ESC SLIDE (4WN1) pin E and EPSU (10WL) pin C, PROX SW-HANDLE, L FWD ESC SLIDE (4WN1) pin F and GND, PROX SW-HANDLE, L FWD PAX/CREW DOOR (13WV1) pin E and EPSU (10WL) pin D, PROX SW-HANDLE, L FWD PAX/CREW DOOR (13WV1) pin F and GND (Ref. ASM 33-51/01) and (Ref. AWM 33-51-04).

 - install the old ESCAPE SLIDE FWD L (7500MM) (Ref. AMM TASK 25-62-44-400-001).

 - install the removed ESCAPE SLIDE FWD R (7501MM) again (Ref. AMM TASK 25-62-44-400-001).

 (h) If the fault continues:

 - replace the PROX SW-HANDLE, L FWD ESC SLIDE (4WN1) (Ref. AMM TASK 52-73-11-000-001) and (Ref. AMM TASK 52-73-11-400-001).

 (i) If the fault continues:

 - replace the PROX SW-HANDLE, L FWD PAX/CREW DOOR (13WV1) (Ref. AMM TASK 52-71-11-000-001) and (Ref. AMM TASK 52-71-11-400-001).

 (j) If the fault continues:

 - replace the PROX SW-HANDLE, R FWD ESC SLIDE (4WN2) (Ref. AMM TASK 52-73-11-000-001) and (Ref. AMM TASK 52-73-11-400-001).
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 004-049, 053-099, 101-105, 151-199, ∞∞33-51-00∞∞∞∞∞∞∞∞∞∞Page 259
 201-299, May 01/05 CES (k) If the fault continues:

 - replace the PROX SW-HANDLE, R FWD PAX/CREW DOOR (13WV2) (Ref. AMM TASK 52-71-11-000-001) and (Ref. AMM TASK 52-71-11-400-001).
R **ON A/C 001-003, 051-052,
 C. If the operational test gives the maintenance message
 EPSU EXT LOAD EMER L:

 - do the operational test of the emergency lights not with CIDS (Ref. AMM TASK 33-51-00-710-006).
 (1) If the green LED 'OK EXTERNAL LOADS' comes on:

 - replace the POWER SUPPLY UNIT-EMERGENCY (11WL) (Ref. AMM TASK 33-51-38-000-001) and (Ref. AMM TASK 33-51-38-400-001).

 (2) If the red LED 'FAULT EXTERNAL LOADS' comes on, do the test of the left escape-hatch switches of the emergency-exit escape-slide lighting (Ref. AMM TASK 33-51-00-720-001).

 (a) If one or more lamps of the LIGHT-FWD EMER, OVERWING (61WL) and the LIGHT-AFT EMER, OVERWING (63WL) do not come:
 - replace the lamp(s) (Ref. AMM TASK 33-51-15-000-001) and (Ref. AMM TASK 33-51-15-400-001).
 1 If the fault continues:
_
 - replace the related LIGHT-FWD EMER, OVERWING (61WL) and/or LIGHT-AFT EMER, OVERWING (63WL) (Ref. AMM TASK 33-51-15-000-001) and (Ref. AMM TASK 33-51-15-400-001).
 (b) If all lamps of the LIGHT-FWD EMER, OVERWING (61WL) and the LIGHT-AFT EMER, OVERWING (63WL) come on and a correct adapter cable between the escape slide and the aircraft electrical connector is available:
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 LIGHTS 燈光(102)