- CHECK VALVE- ELEC PUMP DELIVERY, Y (3083GM)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R 29-24-00-810-801 Loss or Fluctuation of the Pressure of the Yellow
R Electric Pump CMM 29-20-28 CMM 29-21-20 CMM 29-21-21 AMM 29-13-14-000-001 Removal of the HP Manifold of the Yellow Hydraulic
System
AMM 29-13-14-400-001 Installation of the HP Manifold of the Yellow
Hydraulic System AMM 29-13-45-610-001 Servicing of the HP-Filter (3048GM) AMM 29-24-00-710-001 Operational Test of the Yellow Auxiliary Power AMM 29-24-21-000-001 Removal of the Yellow E-Pump Check Valve (3083GM) AMM 29-24-21-400-001 Installation of the Yellow E-Pump Check Valve
(3083GM)
AMM 29-24-51-000-001 Removal of the Electric Pump (3075GX)
AMM 29-24-51-400-001 Installation of the Electric Pump (3075GX)
3. Fault Confirmation
__________________
A. Do the operational test of the Yellow electric pump (Ref. AMM TASK 29-24-00-710-001).
4. Fault Isolation
_______________
A. If the test gives:
R (1) Fluctuation of the hydraulic pressure: R - Refer to (Ref. TASK 29-24-00-810-801). R
R (2) The ELEC PUMP-Y (3075GX) operates but supplies no hydraulic pressure: R
R (a) Remove the ELEC PUMP-Y (3075GX) (Ref. AMM TASK 29-24-51-000-001). R
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞29-24-00∞∞∞∞∞∞∞∞∞∞Page 207
Nov 01/04 CES
R (b) Examine the:
- coupling shaft (Ref. CMM 29-21-21) and
- inner components (Ref. CMM 29-20-28) or (Ref. CMM 29-21-20)
of the ELEC PUMP-Y (3075GX) for damage.
R
R (c) If you find damage:
R
R 1_ Remove the CHECK VALVE- ELEC PUMP DELIVERY, Y (3083GM) (Ref.
AMM TASK 29-24-21-000-001).
R
R 2_ Do a visual inspection of the CHECK VALVE- ELEC PUMP DELIVERY,
R Y (3083GM) for damage and missing parts.
R
R 3_ If parts are missing, do the subsequent before you install the
R new check valve:
- Examine the Yellow HP filter (3048GM) (Ref. AMM TASK 29-13-
45-610-001) and the Yellow HP manifold (Ref. AMM TASK 29-13-
14-000-001) and (Ref. AMM TASK 29-13-14-400-001) to find
these parts.
R
R 4_ Install the CHECK VALVE- ELEC PUMP DELIVERY, Y (3083GM) (Ref.
AMM TASK 29-24-21-400-001).
R
R 5_ Replace the ELEC PUMP-Y (3075GX) (Ref. AMM TASK 29-24-51-400-
001).
5. Close-up________
A. Do the test as given in Para. 3. A. to make sure that the operation is
correct.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞29-24-00∞∞∞∞∞∞∞∞∞∞Page 208
Nov 01/04 CES
TASK 29-24-00-810-805
Intermittent Operation of the Yellow Electric Pump
1. Possible Causes
_______________
- CT-Y ELEC PUMP (3807GX)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R 29-24-00-810-801 Loss or Fluctuation of the Pressure of the Yellow
R Electric Pump AMM 29-24-00-710-001 Operational Test of the Yellow Auxiliary Power AMM 29-24-15-000-001 Removal of the Yellow Electric Pump Current Transformer (3807GX) AMM 29-24-15-400-001 Installation of the Yellow Electric Pump Current Transformer (3807GX)
3. Fault Confirmation
__________________
A. Do the operational test of the Yellow electric pump (Ref. AMM TASK 29-24-00-710-001).
4. Fault Isolation
_______________
A. If the Yellow electric pump starts to operate and stops after some seconds during the operational test:
- Do a check of the red indicator light on the phase unbalance detector (3808GX).
(1) If the red indicator light on the phase unbalance detector (3808GX) is on:
- Replace the CT-Y ELEC PUMP (3807GX) (Ref. AMM TASK 29-24-15-000-001) and (Ref. AMM TASK 29-24-15-400-001).
(2) If the red indicator light on the phase unbalance detector (3808GX) is not on, or the fault continues after replacement of the CT-Y ELEC PUMP (3807GX): 中國(guó)航空網(wǎng) m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 Trouble Shooting Manual 排故手冊(cè) 液壓(98)
