A. If during the test the E-pump symbol on the HYD page of the lower ECAM DU shows LO in amber color and the system pressure is correct:
- replace the PRESSURE SWITCH-ELECTRIC PUMP 2074GJ (Ref. AMM TASK 29-12-17-000-001) and (Ref. AMM TASK 29-12-17-400-001).
B. If after the test the E-pump symbol on the HYD page of the lower ECAM DU shows IN-Line in green color:
- replace the PRESSURE SWITCH-ELECTRIC PUMP 2074GJ (Ref. AMM TASK 29-12-17-000-001) and (Ref. AMM TASK 29-12-17-400-001).
C. If, after the test, the link from the E-pump to the RAT on the HYD page of the lower ECAM DU is displayed in green color with the Blue E-pump in off position:
(1) Replace the PRESSURE SWITCH-ELECTRIC PUMP 2074GJ (Ref. AMM TASK 29-12-17-000-001) and (Ref. AMM TASK 29-12-17-400-001).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞29-12-00∞∞∞∞∞∞∞∞∞∞Page 231
May 01/04 CES
(2) If the fault continues:
(a) Do a check of the wiring and/or the electrical connector (2074GJ-A) of the PRESSURE SWITCH-ELECTRIC PUMP 2074GJ for correct condition (Ref. ASM 29-12/01).
(b) If necessary, repair the wiring and /or the electrical connector (2074GJ-A) of the PRESSURE SWITCH-ELECTRIC PUMP 2074GJ (Ref. ASM 29-12/01).
D. Do the test given in Para. 3
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞29-12-00∞∞∞∞∞∞∞∞∞∞Page 232
Feb 01/03R
CES
TASK 29-12-00-810-809
Fault of the System Pressure Indication of the Blue Hydraulic System on the ECAM Lower DU
1. Possible Causes_______________
- PRESSURE TRANSDUCER-HYDRAULIC (2065GN)
2. Job Set-up Information______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R R R AMM AMM AMM 29-12-00-710-001 29-32-11-000-002 29-32-11-400-002 Functional Check of Blue Electrical Pump Pressure by Reading ECAM Indication Removal of the Hydraulic Pressure Transducer (2065GN) Installation of the Hydraulic Pressure Transducer (2065GN)
3. Fault Confirmation__________________
A. Do the operational test of the electric pump of the Blue hydraulic system (Ref. AMM TASK 29-12-00-710-001).
4. Fault Isolation_______________
A. If, during the test, the operation of the flight controls is correct, but the HYD page on the ECAM lower DU shows for the Blue hydraulic system the subsequent condition: the system pressure indication in amber (less than 1450 PSI), the system pressure identification (BLUE) in white, the system arrow in green. - replace the PRESSURE TRANSDUCER-HYDRAULIC (2065GN) (Ref. AMM TASK 29-32-11-000-002) and (Ref. AMM TASK 29-32-11-400-002).
B. Do the test given in Para. 3
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞29-12-00∞∞∞∞∞∞∞∞∞∞Page 233
May 01/04 CES
TASK 29-12-00-810-810
Continues Running of the Blue Electric Pump
1. Possible Causes
_______________
- LGCIU-1 (5GA1)
- RELAY (2708GJ)
- RELAY (2709GJ)
- RELAY (2713GJ)
- RELAY (2710GJ)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R AMM 29-12-00-710-001 Functional Check of Blue Electrical Pump Pressure by
R Reading ECAM Indication AMM 32-31-71-000-001 Removal of the LGCIU (5GA1, 5GA2) AMM 32-31-71-400-001 Installation of the LGCIU (5GA1, 5GA2)
3. Fault Confirmation
__________________
A. Do the operational test of the electric pump of the Blue hydraulic system (Ref. AMM TASK 29-12-00-710-001).
4. Fault Isolation
_______________
A. If there is a continues running of the Blue electric pump after the operational test is completed:
- replace the RELAY (2708GJ).
(1) If the fault continues:
- replace the RELAY (2709GJ).
(2) If the fault continues:
- replace the RELAY (2713GJ).
(3) If the fault continues: 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 液壓(48)
