R Engine Unbalance Data
R Figure 505A/TASK 77-32-34-991-940-A44 (SHEET 4)

 F 『R EEFF : 051-051, E Page 53377-32-34
 E E May 01/05 E E ECES E -------------------------------------------------------------------------------

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

ACTION RESULT -------------------------------------------------------------------------------**ON A/C 051-051,
 (Ref. Fig. 505A/TASK 77-32-34-991-940-A)
 **ON A/C ALL
 2. On the MCDU keyboard, load the  The new value comes into view under the new value. < RETURN indication
R  **ON A/C 001-049, 052-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 **ON A/C 051-051,
 **ON A/C ALL
 - Two digits for N1 speed

- One digit 0, 1 or 2 for N

 - Two digits between 4 and 99 for time

 NOTE : You must insert a "/"
____ between N1, N and TIME when you type these data.
 3. Push the line key adjacent to the old values that you must change
(Ref. Fig. 505/TASK 77-32-34-991-940)
 (Ref. Fig. 505A/TASK 77-32-34-991-940-A)
Detail B.
The new values come into view andreplaces the old values.
 NOTE : If the EVMU does not accept the new value, the old value comes into
____
 view and you must do the operation again.

 4. Do the procedure again to change the other values if necessary.
 F 『 EEFF : ALL E Page 53477-32-34
 E E Aug 01/05 E E ECES E

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
5. Push the line key adjacent to the
 SAVE indication.

 6. On the MCDU, push the line key
 adjacent to the RETURN indication
 until the CFDS menu page comes
 into view.

R  **ON A/C 001-049, 052-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 Subtask 77-32-34-860-056
 B. Read the Engine Unbalance Data
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. Push the line key adjacent to the  The values recorded during the flight ENG1(2) FLIGHT DATA indication. come into view
 (Ref. Fig. 505/TASK 77-32-34-991-940)
 NOTE : If for a loaded speed the acquisition did not occur, the message NO
____
 ACQUISITION comes into view.

 2. On the MCDU, push the line key
 adjacent to the RETURN indication
 until the CFDS menu page comes
 into view.

 F 『 EEFF : ALL E Page 53577-32-34
 E E Aug 01/05 E E ECES E

 F 『
 E C F M E
 E E
 E 56-5B E
 E E

R **ON A/C 051-051,
R Subtask 77-32-34-860-056-A
R B. Read the Engine Unbalance Data
R -------------------------------------------------------------------------------R ACTION RESULT R -------------------------------------------------------------------------------
R 1. Push the line key adjacent to the The values recorded during the flight R READ indication for the left or come into view R the right engine to get the READ R program.
R  (Ref. Fig. 505A/TASK 77-32-34-991-940-A)
R NOTE : No data come into view if for a loaded speed the acquisition did not
____ R occur. The message NO ACQUISITION comes into view.
R 2. On the MCDU, push the line key R adjacent to the RETURN indication R until the CFDS menu page comes R into view.
R **ON A/C ALL
 5. Close-up
________
 Subtask 77-32-34-862-065
 A. De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
 F 『 EEFF : ALL E Page 53677-32-34
 E E May 01/05 E E ECES E

 F 『
 E C F M E
 E E
 E 56-5B E
 E E

 TASK 77-32-34-860-043
 Unbalance Acquisition on the Ground
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM ENGINE INDICATING 發動機指示(63)