F 『
E C F M E
E E
E 56-5B E
E E
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU EIS/DMC3/STBY/SPLY 14WT1 E10 49VU EIS/DMC1/SWTG 21WT1 E09 49VU EIS/DMC3/SWTG 21WT3 E07 49VU EIS/ECAM DU/UPPER/SWTG 24WT1 E06 49VU EIS/ECAM DU/UPPER/SPLY 13WT1 E05 49VU EIS/PFD CAPT/SWTG 22WT1 E04 49VU EIS/ND CAPT/SWTG 23WT1 E02 49VU EIS/ND CAPT/SPLY 12WT1 E01
R **ON A/C 106-149, 303-399, 401-499,
49VU EIS/PFD/CAPT/SPLY 11WT1 E03
**ON A/C ALL
121VU EIS/DMC3/SPLY 10WT3 Q09 121VU EIS/DMC2/SPLY 10WT2 Q08 121VU EIS/ECAM DU/LOWER/SPLY 13WT2 R11 121VU EIS/ECAM DU/LOWER/SWTG 24WT2 R10 121VU EIS/DMC2/SWTG 21WT2 R08 121VU EIS/ND/F/O/SWTG 23WT2 R06 121VU EIS/PFD/F/O/SWTG 22WT2 R05 121VU EIS/ND/F/O 12WT2 R04 121VU EIS/PFD/F/O 11WT2 R03
Subtask 77-00-00-860-058
C. Preparation before tests
(1) Do the EIS start procedure (Upper and Lower ECAM DUs only) (Ref. TASK 31-60-00-860-001).
(2) On the left or right MCDU get the SYSTEM REPORT TEST page (Ref. TASK 31-32-00-860-001).
F 『 EEFF : ALL E Page 50277-00-00
E E Aug 01/05 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
R 4. Procedure_________
R (Ref. Fig. 501/TASK 77-00-00-991-300)
R Subtask 77-00-00-710-054
R A. Do these tests:
R -------------------------------------------------------------------------------R ACTION RESULT R -------------------------------------------------------------------------------
R 1. Push the line key adjacent to
R INST
R 2. Push the line key adjacent to
R EIS1
R
R
R
R
R 3. Push the line key adjacent to
R ENGINES
R 4. Push the line key adjacent to the
R desired Max Values
R
R 5. Push the line key adjacent to
R RETURN until the CFDS MENU comes
R into view.
R 6. Stop the MCDU
R 5. Close-up________
R Subtask 77-00-00-860-059
The INST menu comes into view
- EIS (DMC1) page comes into view.
- On the PFD, ND CAPT side and upper ECAM display unit MAINTENANCE MODE comes into view.
- The MASTER CAUT light comes on.
- Ignore the ECAM warnings.
The EIS (DMC1) ENGINE OVER SPD/TEMP shows.
The page comes into view to show the Max values reached during the last flight leg.
The CFDS MENU comes into view.
R A. Do the EIS stop procedure: (Ref. TASK 31-60-00-860-002). R Subtask 77-00-00-862-054 R B. De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-
R 002).
F 『 EEFF : ALL E Page 50377-00-00
E E Nov 01/99 E E ECES E F 『 E C F M E E E E 56-5B E
MCDU Display
Figure 501/TASK 77-00-00-991-300
F 『 EEFF : ALL E Page 50477-00-00
E E Feb 01/98 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
TASK 77-00-00-710-042
Reset of the N1, N2 and EGT Max Pointers
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 31-32-00-860-001 Procedure to Get Access to the SYSTEM REPORT/TEST
Menu Page
31-60-00-860-001 EIS Start Procedure
31-60-00-860-002 EIS Stop Procedure
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM ENGINE INDICATING 發(fā)動機指示(6)
