1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific access platform 2.0 m (6 ft. 7 in.)
No specific access platform 3.0 m (9 ft. 10 in.)
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power 25-55-11-000-001 Removal of the AFT Cargo-Compartment Partition FR47 25-55-11-400-001 Installation of the AFT Cargo-Compartment Partition
FR47 25-55-12-000-001 Removal of the AFT Cargo Compartment Partition FR65 25-55-12-400-001 Installation of the AFT Cargo Compartment Partition
FR65
31-60-00-860-001 EIS Start Procedure
31-60-00-860-002 EIS Stop Procedure
R 36-22-00-790-001 Leak Check on all the Bleed Air Ducts 49-00-00-860-003 APU Start by External Power (GTCP 36-300) 49-00-00-860-004 APU Shutdown by External Power (GTCP 36-300) 49-00-00-860-005 APU Start by External Power (APS 3200) 49-00-00-860-006 APU Shutdown by External Power (APS 3200) 49-00-00-860-008 APU Start by External Power (131-9(A)) 49-00-00-860-009 APU Shutdown by External Power (131-9(A))
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R 52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump **ON A/C 001-049, 051-099, 101-105, 201-210,
36-12-00-991-001 **ON A/C 151-199, Fig. 501
36-12-00-991-001-A **ON A/C ALL Fig. 501A
R 3. Job Set-up__________ **ON A/C 001-049, 051-099, 101-149, 201-299,
Subtask 36-12-00-010-052
A. Get Access
R **ON A/C 001-049, 051-099, 101-105, 201-210,
R (Ref. Fig. 501/TASK 36-12-00-991-001) **ON A/C 001-049, 051-099, 101-149, 201-299,
NOTE : Remove only the related access panels in the area where you will____ do the leak test.
(1) Get access to the APU bleed-air ducts between FR35 and FR36. (a) Put the access platform in position below the access panels 191BB and 191EB.
R 1EFF : ALL 1 36-12-00Page 512 1 1 May 01/05 1 1 1CES 1
APU Bleed Air Ducts - Access
Figure 501/TASK 36-12-00-991-001
R 1EFF : 001-049, 051-099, 101-105, 201-210, 1 36-12-00Page 513 1 1 May 01/05 1 1 1CES 1
(b) Remove the access panels 191BB and 191EB.
(2)
Get access to the APU bleed-air ducts between FR36 and FR42.
(a)
Put the access platform in position below the access panel 191JB.
(b)
Remove the access panel 191JB.
(3)
Get access to the APU bleed-air ducts between FR42 and FR50.
(a)
Put the access platform in position below the access panels 147AB, 147EB, 147FB and 197BB.
(b)
Remove the access panels 147AB, 147EB, 147FB and 197BB.
(4)
Get access to the APU bleed-air ducts between FR46 and FR70 from the AFT cargo compartment.
(a)
Open the AFT cargo compartment door (Ref. TASK 52-30-00-860-001).
(b)
Remove the applicable access panels for the APU bleed-air ducts:
-
between the FR46 and FR47 remove the partition panel 151BW (Ref. TASK 25-55-11-000-001)
-
between the FR47 and FR49
remove the access panel 151CW
-
between the FR49 and FR52
remove the access panel 151DW
-
between the FR52 and FR55
remove the access panel 151EW
-
between the FR55 and FR58
remove the access panel 151HW
-
between the FR58 and FR59
remove the access panel 151JW
-
between the FR59 and FR62
remove the access panel 161AW
-
between the FR62 and FR63
remove the access panel 161BW
-
between the FR63 and FR65
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM PNEUMATIC 氣源 2(62)
