**ON A/C 061-061,
 (Ref. Fig. 401A/TASK 30-21-49-991-300-A) R **ON A/C 001-049, 051-060, 062-099, 101-149, 151-199, 201-299, 301-399, R 401-499, Subtask 30-21-49-420-066
 A. Installation of the Pressure Tubes and Hoses
 (1) Remove the protective covers from the union on the anti-ice valve, the union on the pneumatic duct, the elbow on the fireshield, and all hoses and tubes.
 NOTE : Do not torque the tube fittings or the bolts and nuts that
____ attach the clamps until all of the tubes and hoses have been installed and the routing on the engine is correct.
 PRE SB RA32030-2
 (2) Connect the upper muscle tube (55) to the union (50) on the pneumatic duct and the elbow (75) on the fireshield. Do not torque the coupling nuts.
 NOTE : Do not bend the tube (70) ends to make it fit. A bend will
____ make the tube weak. If the tube is weak, it can fail.
 POST SB RA32030-2
 (3) Install the flexible hose assembly (95), as follows:
 (a)
 Connect the flexible hose assembly (95) to the union (50) on the pneumatic duct and the elbow (75) on the fireshield.

 (b)
 Put the clamp (90) on the hose (95). Attach the clamp to the bracket on the fireshield with the bolt (80) and the washer (85).

 NOTE : If the clamp (90) is loose on the hose (95), wrap Scotch
____ 3M-361 Tape (Material No. CP2208) around the hose to make the clamp fit tightly.
 (c)
 TORQUE the bolt (80) to between 20 and 25 lbf.in (0.22 and 0.28 m.daN).

 (d)
 Make sure that there is no preload on the hose. TORQUE the hose

 (95) coupling nuts to between 135 and 150 lbf.in (1.52 and 1.69 m.daN).
 NOTE : Use a second wrench to hold the elbow on the fireshield
____ and the union on the pneumatic duct when you torque the coupling nuts on the hose assembly.
 END SB RA32030-2
 (4)
 Install the aft muscle pressure tube (70).

 (a)
 Connect the aft muscle tube (70) to the elbow (75) on the
 fireshield. Do not torque the coupling nut.

 (b)
 Put the two clamps (45) on the aft muscle tube (70). Attach the clamps to the engine-tubes fairlead brackets (two locations). Use the bolts (25), the washers (30), and nuts (35).

 (c)
 Put a clamp (45) on the aft muscle tube (70). Attach the clamp

 (45) and the clamp (65) (on the drain tube) to the bracket at engine flange STA 199 with the bolt (25) and the nut (35).

 (d)
 Put a clamp (45) on the aft muscle tube (70). Attach the clamp

 (45) to the bracket at engine flange STA 199 with the bolt (60) and the nut (35).

 (5)
 Install the forward muscle pressure tube (20).

 (a)
 Loosely install the forward muscle tube (20) on the forward anti-ice duct support bracket with the bulkhead nut (10) and the washer (15).

 (b)
 Put two clamps (45) on the forward muscle tube (20). Attach the clamps to the anti-ice duct tangs with the bolts (25), the washers (30), and the nuts (35).

 (6)
 Connect the hose (5) to the aft muscle tube (70) and the forward muscle tube (20). Do not torque the coupling nuts.

 (7)
 Connect the forward hose (40) to the forward muscle pressure tube

 (20) and to the union on the anti-ice valve (4000DN).

 (8)
 Make sure that all of the tubes and hoses are correctly installed on the engine.

R 1EFF : 001-049, 051-060, 062-099, 101-149, 1 30-21-49Page 418 1151-199, 201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 (9) TORQUE the nuts (35) to between 20 and 25 lbf.in (0.22 and 0.28
 m.daN).

 (10) TORQUE the hose (55) coupling nuts to between 135 and 150 lbf.in
 (1.52 and 1.69 m.daN).
 NOTE : Use a second wrench to hold the union on the pneumatic duct

____ and the elbow on the fireshield when you torque the hose (55) coupling nuts.
 (11) TORQUE the muscle tube (70) coupling nut at the fireshield fitting to between 135 and 150 lbf.in (1.52 and 1.69 m.daN).
 NOTE : Use a second wrench to hold the elbow on the fireshield when
____
 you torque the tube (70) coupling nut.

 (12) TORQUE the bulkhead nut (10) on the muscle tube (20) to between 110 and 120 lbf.in (1.24 and 1.35 m.daN).
 NOTE : Hold the muscle tube (20) fitting with a second wrench when
____
 you torque the bulkhead nut (10).

 (13) TORQUE the hose (5) coupling nuts to between 135 and 150 lbf.in (1.52 and 1.69 m.daN).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM ICE AND RAIN PROTECTION 防冰和排雨1(67)