(b)
Remove the bolt (25) and the nut (35) that attach the clamp (45) and the clamp (65) (on the drain tube) to the bracket at engine flange STA 199.
NOTE : Loosely install the bolt (25) and nut (35) in the clamp
____
(65) and tighten them with your hand.
R 1EFF : 001-049, 051-060, 062-099, 101-149, 1 30-21-49Page 410 1151-199, 201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
(c)
Remove the bolts (25), the washers (30), the nuts (35), and clamps (45) (two locations) from the engine-tubes fairlead brackets.
(d)
Disconnect the aft muscle-tube (70) coupling nut from the elbow
(75) at the fireshield and remove the tube.
NOTE : Use a second wrench to hold the elbow on the fireshield
____ when you loosen the coupling nut on the tube.
PRE SB RA32030-2
(5) Disconnect the upper muscle-tube (55) coupling nut from the elbow
(75) on the fireshield and the union (50) on the pneumatic duct. Remove the tube (55).
NOTE : Use a second wrench to hold the elbow at the fireshield and
____ the union on the pneumatic duct when you loosen the coupling nuts on the tube.
POST SB RA32030-2
(6)
Remove the bolt (80), the washer (85) and the clamp (90) that attach the hose assembly (95) to the bracket on the fireshield.
(7)
Disconnect the flexible hose assembly (95) coupling nuts from the elbow (75) on the fireshield and the union (50) on the pneumatic duct.
NOTE : Use a second wrench to hold the elbow on the fireshield and
____ the union on the pneumatic duct when you loosen the coupling nuts on the flexible hose assembly.
END SB RA32030-2
(8)
Put protective covers on all of the disconnected hoses and tubes.
(9)
Put protective covers on the union on the anti-ice valve, the elbow on the fireshield, and the union on the pneumatic duct.
R 1EFF : 001-049, 051-060, 062-099, 101-149, 1 30-21-49Page 411 1151-199, 201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
R **ON A/C 061-061,
R Subtask 30-21-49-020-050-A
R A. Removal of the Muscle Pressure Tubes and Hoses
R (1) Disconnect the forward hose (40) from the muscle tube (20) and from
R the anti-ice valve 4000DN. Remove the hose (40).
R NOTE : Use a second wrench to hold the union on the valve and the____
R fitting on the tube when you loosen the coupling nuts on the
R hose.
R (2) Disconnect the aft hose (5) from the forward muscle tube (20) and the
R aft muscle tube (70). Remove the hose (5).
R NOTE : Use a second wrench to hold the fitting on the forward tube____
R and the fitting on the aft tube when you loosen the coupling
R nuts on the hose.
R (3) Remove the forward muscle pressure tube (20).
R (a) Remove the bolts (25), the washers (30), the nuts (35), and the
R clamps (45) (two locations) that attach the forward muscle tube
R (20) to the forward anti-ice duct.
R (b) Remove the bulkhead nut (10) and the washer (15) that connect the
R muscle tube (20) to the forward anti-ice duct support bracket.
R NOTE : Use a second wrench to hold the fitting on the forward____
R tube when you loosen the bulkhead nut.
R (c) Remove the tube (20).
R (4) Remove the aft muscle pressure tube (70).
R (a) Remove the bolt (50), the nut (20) and the clamp (25) from the
R bracket at engine flange STA 199.
R (b) Remove the bolt (25) and the nut (35) that attach the clamp (45)
R and the clamp (65) (on the drain tube) to the bracket at engine
R flange STA 199.
R NOTE : Loosely install the bolt (25) and nut (35) in the clamp____
R (65) and tighten them with your hand.
R 1EFF : 061-061, 1 30-21-49Page 412 1 1 May 01/05 1 1 1CES 1
R (c) Remove the bolts (25), the washers (30), the nuts (35), and
R clamps (45) (two locations) from the engine-tubes fairlead
R brackets.
R (d) Disconnect the aft muscle-tube (70) coupling nut from the elbow
R (75) at the fireshield and remove the tube.
R NOTE : Use a second wrench to hold the elbow on the fireshield____
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM ICE AND RAIN PROTECTION 防冰和排雨1(65)
