-------------------------------------------------------------------------------
INSPECT/CHECK MAXIMUM REMARKS
SERVICEABLE LIMITS
-------------------------------------------------------------------------------
R B. Crimps. None permitted. Replace the hose-tube
R assembly (Ref. TASK 29-11-
R 49-000-003) and (Ref. TASK
29-11-49-400-003).
R C. Cuts, tears on Maximum depth must be If the damage is more than
R fire sleeve. less than one half of the allowable limits,
R the sleeve thickness. replace the hose-tube
R assembly (Ref. TASK 29-11-
R 49-000-003) and (Ref. TASK
29-11-49-400-003).
R D. Internal blockage. None permitted. Remove the blockage or
R replace the hose-tube
R assembly (Ref. TASK 29-11-
R 49-000-003) and (Ref. TASK
29-11-49-400-003).
R E. Leakage. None permitted. Replace the hose-tube
R assembly (Ref. TASK 29-11-
R 49-000-003) and (Ref. TASK
29-11-49-400-003).
R F. Nicks and Maximum depth cannot be If the damage is more than
R scratches-tubes more than 0.0035 in. the allowable limits,
R portion of suction (0.0889 mm) deep (10 replace the hose-tube
R hose-tube percent of wall assembly (Ref. TASK 29-11-
R assembly. thickness). 49-000-003) and (Ref. TASK
R 29-11-49-400-003).
R G. End-fitting thread Damage is permitted if If the damage is more than
R damage. the threads that are the allowable limits,
R good are not reduced by replace the hose-tube
R more than one thread. assembly (Ref. TASK 29-11-
R 49-000-003) and (Ref. TASK
R 29-11-49-400-003).
-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
R H. End-fitting Damage is permitted if If the end-fittings cannot
R damaged flats. the damaged end-fittings keep the correct torque
R can keep the correct value, replace the
R torque value. hose-tube assembly
R (Ref. TASK 29-11-49-000-
R 003) and (Ref. TASK 29-11-
49-400-003).
R 5. Examine the hydraulic low pressure switch hose-tube assembly, look for:
R A. Cracks. None permitted. Replace the hose-tube
R assembly (Ref. TASK 29-11-
R 49-000-005) and (Ref. TASK
R 29-11-49-400-005).
R B. Crimps. None permitted. Replace the hose-tube
R assembly (Ref. TASK 29-11-
R 49-000-005) and (Ref. TASK
R 29-11-49-400-005).
R C. Cuts, tears on Maximum depth must be If the damage is more than
R fire sleeve. less than one half of the allowable limits,
R the sleeve thickness. replace the hose-tube
R assembly (Ref. TASK 29-11-
R 49-000-005) and (Ref. TASK
R 29-11-49-400-005).
R D. Internal blockage. None permitted. Remove the blockage or
R replace the hose-tube
R assembly (Ref. TASK 29-11-
R 49-000-005) and (Ref. TASK
R 29-11-49-400-005).
R E. Leakage. None permitted. Replace the hose-tube
R assembly (Ref. TASK 29-11-
R 49-000-005) and (Ref. TASK
R 29-11-49-400-005).
-------------------------------------------------------------------------------
INSPECT/CHECK MAXIMUM REMARKS
SERVICEABLE LIMITS
-------------------------------------------------------------------------------
R F. Nicks and Maximum depth cannot be If the damage is more than
R scratches-tubes more than 0.0035 in. the allowable limits,
R portion of suction (0.0889 mm) deep (10 replace the hose-tube
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM HYDRAULIC POWER 液壓2(118)
