(4)
 Remove the access platform(s).

 1EFF : ALL 1 12-22-52Page 323 1 1 May 01/05R 1 1 1CES 1

R **ON A/C 001-049, 051-099, 101-149, 221-221, 224-224, 228-228,
 TASK 12-22-52-640-007
 Lubrication of the BULK Cargo Compartment-Door Handle
 WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK AREA WHEN
_______ YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 523300-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific lint-free cloth
 No specific access platform 2.3 m (7 ft. 7 in.)

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-004  USA MIL-PRF-23827 TYPE I
 SYNTH.ESTER BASED GREASE HIGH PRESSURE
 (Ref. 20-31-00)

 Material No. 15-004  USA MIL-C-16173 GRADE 3
 CORROSION PREVENTIVE COMPOUND (Ref. 20-31-00)

R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 12-22-52Page 324 1224-224, 228-228, 1May 01/05 1 1 1CES 1 C. Referenced Information

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R 12-22-52-991-015 Fig. 306
 3. Job Set-up
__________
 Subtask 12-22-52-010-057

 A. Get Access
 (1)
 Put the access platform in position below the closed BULK cargo-compartment door (refered to as Bulk door).

 (2)
 Push the button of the external door handle so that it moves from its recess.

 NOTE : Do not move the external door handle in the UNLOCK position at
____
 this time.

 4. Procedure
_________ R (Ref. Fig. 306/TASK 12-22-52-991-015) Subtask 12-22-52-640-056
 A. Lubrication of the External Door Handle
 (1)
 Apply COMMON GREASE (Material No. 04-004) on the shaft of the external door handle.

 (2)
 Remove the unwanted grease with a lint-free cloth. WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE

_______ THIS/THESE MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES AND GOGGLES.

 (3)
 Apply STORAGE PRESERVATION (Material No. 15-004) to the inner surfaces and the adjacent area of the external door handle.

R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 12-22-52Page 325 1224-224, 228-228, 1May 01/05 1 1 1CES 1

 External Door Handle of Bulk Cargo-Compartment Door R Figure 306/TASK 12-22-52-991-015
R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 12-22-52Page 326 1224-224, 228-228, 1May 01/05 1 1 1CES 1

 5. Close-up
________ Subtask 12-22-52-410-056
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Push the external door handle into its recess so that it is flush with the door contour.

 (3)
 Remove the access platform(s).

R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 12-22-52Page 327 1224-224, 228-228, 1May 01/05 1 1 1CES 1 **ON A/C ALL

 TASK 12-22-52-640-008
 Lubrication of the Avionics Compartment-Door Handles
 WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK AREA WHEN
_______ YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 524100-02
 2. Job Set-up Information
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM SERVICING 2(28)