-------------------------------------------------------------------------------

| MAIN LANDING GEAR | -------------------------------------------------------------------------------| Item| Specified Components | Greasers | Quantity of Lubrication Greasers | | No. | to be Lubricated | Total QTY| at each Position | |-----|----------------------|----------|-------------------------------------| | 10 | Side-Stay Bracket, | 4 | 2 at each bush | | | at A/C structure | | | -------------------------------------------------------------------------------
R 1EFF : 004-049, 053-099, 101-149, 151-199, 1 12-22-32Page 341 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
| MAIN LANDING GEAR DOOR AND UPLOCKS | -------------------------------------------------------------------------------| Item| Specified Components | Greasers | Quantity of Lubrication Greasers | | No. | to be Lubricated | Total QTY| at each Position | |-----|----------------------|----------|-------------------------------------| | 1 | MLG Door Uplock | 4 | 2 on each side | |-----|----------------------|----------|-------------------------------------| | 2 | MLG Door | 1 | 1 on the aft hinge | |-----|----------------------|----------|-------------------------------------| | 3 | MLG Door | 1 | 1 on the roller | | | Uplock-Roller | | | |-----|----------------------|----------|-------------------------------------| | 4 | MLG Door Actuating | 2 | 1 at each end of the actuating | | | Cylinder | | cylinder | |-----|----------------------|----------|-------------------------------------| | 5 | MLG Uplock | 4 | 2 on each side | -------------------------------------------------------------------------------
(2) Remove the unwanted grease:
 (a)
 Clean the greasers with a clean MISCELLANEOUS (Material No. 19-003) and CLEANING AGENTS (Material No. 11-026).

 (b)
 Make sure that the greaser ball has seated correctly.

 **ON A/C 051-052,
 Subtask 12-22-32-640-051-C
 B. Lubrication of the MLG
 NOTE : Use the Figures together with the Tables that follow, to find the
____
 greasers.

 NOTE : In the step that follows, make sure that the Materials No. 04-004
____ and No. 04-022 are not mixed together. Do not use them at the same time (Ref. SIL 12-008).
 (1) Lubricate the remaining greasers of the MLG as follows:
 CAUTION : DO NOT OPERATE POWER-OPERATED LUBRICATION EQUIPMENT AT MORE
_______ THAN 207 bars (3000 psi). HIGH LUBRICATION PRESSURE CAN CAUSE DAMAGE TO THE AIRCRAFT.
R 1EFF : 004-049, 051-099, 101-149, 151-199, 1 12-22-32Page 342 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1

R  CAUTION : FOR LUBRICATION OF THE GLAND HOUSING ON THE MLG_______ 
R  BOTTOM-BEARING USE ONLY HAND-OPERATED LUBRICATION 
R  EQUIPMENT. POWER-OPERATED LUBRICATION EQUIPMENT CAN CAUSE 
R  EXTRUSION OF THE MLG BOTTOM-BEARING SCRAPER-SEAL. 
R  (a) Lubricate all of the greasers in the MAIN LANDING GEAR Table with 
R  COMMON GREASE (Material No. 04-004) or COMMON GREASE (Material 
R  No. 04-022) until new grease comes out. 
R  (b) Lubricate the greasers Items 1 thru 4 in the MAIN LANDING GEAR 
R  DOOR AND UPLOCKS Table with COMMON GREASE (Material No. 04-004) 
R  or COMMON GREASE (Material No. 04-022) until new grease comes 
R  out. 

R 1EFF : 051-052, 1 12-22-32Page 343 1 1 May 01/05 1 1 1CES 1R -------------------------------------------------------------------------------R | MAIN LANDING GEAR | R -------------------------------------------------------------------------------R | Item| Specified Components | Greasers | Quantity of Lubrication Greasers | R | No. | to be Lubricated | Total QTY| at each Position | R |-----|----------------------|----------|-------------------------------------|

R  |  1  | Retraction Actuating |  6  |  1 on the piston rod  | 
R  |  | Cylinder  |  |  2 on the piston rod attachment  | 
R  |  |  |  |  pin  | 
R  |  |  |  |  3 on the structure attachment pin | 

R |-----|----------------------|----------|-------------------------------------| R  |  2  | Upper Leg | 7 | 1 on the forward pintle housing | R | | | | 1 on the aft pintle housing | R | | | | 3 on the aft pintle pin | R | | | | 2 on the aircraft structure at the | R | | | | forward pintle bearing (it is | R | | | | permitted to lubricate only 1 | R | | | | greaser when the MLG is | R | | | | installed) | R |-----|----------------------|----------|-------------------------------------| R  |  3  | Gland Housing | 3 | 3 on the bottom bearing | R |-----|----------------------|----------|-------------------------------------| R  |  4  | Torque Link | 9 | 3 on the top torque link | R | | | | 2 on the top torque link | R | | | | attachment pin | R | | | | 3 on the bottom torque link | R | | | | 1 on the spacer assembly adjacent | R | | | | to the torque link damper | R |-----|----------------------|----------|-------------------------------------| R  |  5  | Towing Lugs | 2 | 1 on each lug | R |-----|----------------------|----------|-------------------------------------| R  |  6  | Leg Side-Stay | 2 | 2 on the leg attachment bracket | R | | Attachment | | | R |-----|----------------------|----------|-------------------------------------| R  |  7  | Side-Stay | 15 | 5 at the top cardan joint | R | | | | 7 at the middle joint | R | | | | 3 at the bottom cardan joint | R |-----|----------------------|----------|-------------------------------------| R  |  8  | Lockstay | 13 | 2 at the side-stay attachment | R | | | | 3 at the middle joint | R | | | | 2 on the lockstay attachment lugs | R | | | | of the upper leg | R | | | | 2 on the lockstay cardan joint | R | | | | 2 on the top of the lockstay | R | | | | 2 at the actuator attachment | R |-----|----------------------|----------|-------------------------------------| R  |  9  | Lockstay Actuating | 2 | 1 at each end of the actuating |
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM SERVICING 2(16)