曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 (1) On the overhead panel 25VU, on the CABIN PRESS section: - Push the DITCHING pushbutton switch to close the ventilation skin valves and the outflow valves .
 (2) If the parking is more than 2 days: 
R R  (a) We recommended that you disconnect the batteries 2PB1 and 2PB2 (Ref. TASK 24-38-51-000-001). 
R R R  NOTE : If the batteries stay connected during parking, it is____ necessary to do a check of the batteries 2PB1 and 2BP2 pushbutton switches on OFF position.
 (3) De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
 5. Close-up________
 Subtask 10-11-00-942-055
 A. Close-up.
 (1) Make an entry in the aircraft log book or attach a tag on the Captain side stick to tell the crew that protection covers/devices are installed.
 (2) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
 (3) Close all the pressurized access doors.
 (4) Close the passenger/crew doors (Ref. TASK 52-10-00-410-001).

 

 Subtask 10-11-00-555-066

 B. Periodic Checks and Return to Operation
 (1)
 During the parking period, do the periodic checks:

 -at 7-day intervals (Ref. TASK 10-11-00-200-002).

 (2)
 For return to operation, do the return to operation procedure (Ref. TASK 10-11-00-554-003).

R  (3) You can do the renewal procedure on time (Ref. TASK 10-11-00-555-011).

 TASK 10-11-00-555-008

 Parking Procedure in Flight-ready Condition (Parking of not more than 12 Weeks)
 CAUTION : MAKE SURE THAT YOU OBEY THE MAINTENANCE PROGRAM FOR STORED/ PARKED
_______ AIRCRAFT. DO NOT CHANGE OR STOP THE MAINTENANCE PROGRAM WITHOUT APPROVAL FROM YOUR LOCAL AUTHORITIES.
 CAUTION : DURING THIS PROCEDURE:
_______
 -MAKE SURE THAT THE LANDING GEAR GROUND SAFETIES, LOCKING DEVICES AND WHEEL CHOCKS ARE IN POSITION.
 -KEEP THE ACCESS PLATFORM AT A SUFFICIENT DISTANCE FROM THE AIRCRAFT (IN WIND, SHOCK ABSORBER REBOUND CAN CAUSE MOVEMENT OF THE AIRCRAFT).
 1. Reason for the Job
__________________

 This procedure gives the preservation steps for a parking period of not more than 12 weeks.
 NOTE : The purpose of this procedure is to keep the aircraft in flight-ready
____ condition during the parking period. We recommend that there is no cannibalization or removal of parts during this parking period.
 2. Job Set-up Information
______________________

 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific wheel chocks 25-01-000 1 SUN SCREEN SET - COCKPIT
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-043 VARNISH P.T.F.E SPRAY (Ref. 20-31-00) Material No. 15-002 USA MIL-B-131 TYPE I BARRIER MATERIAL WATER VAPOR PROOF (Ref. 20-31-00)
 EFF : ALL  10-11-00Page 211   Nov 01/04R   CES

 

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
05-57-00-200-001 10-11-00-200-002 10-11-00-200-003 10-11-00-200-004 10-11-00-554-004
10-11-00-555-012 10-11-00-555-013 10-20-00-556-001 12-11-28-650-003 12-11-28-650-004 12-16-38-613-001 12-21-11-615-001 12-21-12-100-002

R 12-21-12-100-003
R 12-21-12-100-004 12-21-12-100-005 12-21-12-100-006 12-21-12-100-007 12-21-12-100-008
12-21-12-100-009 12-22-52-640-002
12-22-52-640-006
12-22-52-640-007 12-22-52-640-008 12-22-52-640-009
12-22-52-640-013
12-22-52-640-014
12-22-52-640-016 12-24-38-680-001
12-31-21-660-001 12-31-24-660-001 12-31-25-660-001 Aircraft StabilityPeriodic Ground Check at 7-day IntervalsPeriodic Groung Check at 15-day IntervalsPeriodic Ground Check at 1-month IntervalsReturn to Operation after Parking not more than 12 WeeksRenewal of 12-Week Parking PeriodProtection Equipment for Parking or Storage ProcedureMooring of the AircraftPressure Refuel with Automatic ControlPressure Refuel with Manual ControlServicing of the Toilet SystemExternal CleaningCleaning of the Cockpit Equipment/Furnishings Cleaning of the Carpets and Non-Textile Floor Covering (NTF)Cleaning of the Plastic Surfaces and MirrorsCleaning of the Seat Covers and CurtainsCleaning of the Light Alloy and Steel ComponentsCleaning of the Cargo CompartmentsCleaning of the Monitors and Display Screens in the CabinCleaning of the Plastic Wash Basin in the LavatoriesLubrication of the FWD and AFT Cargo-Compartment DoorsLubrication of the External Control Handles of the FWD and AFT Passenger/Crew DoorsLubrication of the BULK Cargo Compartment-Door HandleLubrication of the Avionics Compartment-Door HandlesLubrication of the FWD and AFT Cargo-Compartment Door HandleLubrication of the External Control Handle and the Telescopic ArmLubrication of Safety Pin Guide Fitting and Door Arming/Disarming MechanismLubrication of the Hinge-Arm Support-Fitting BearingsDraining of the Potable Water System (with Electrical Power)Cold Weather Maintenance - Air ConditioningCold Weather Maintenance - Electrical PowerCold Weather Maintenance - Equipment/Furnishings
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM PARKING, MOORING, STORAGE & RETURN TO S(6)