(b)
Apply COMMON GREASE (Material No. 04-011) : - on the sliding tube of the shock absorber - on the actuator rods - on the uplock mechanism.
(c)
Apply COMMON GREASE (Material No. 04-004) :
-
to the towing and debogging fittings
-
to the uplock and downlock mechanisms after cleaning of these mechanisms.
(d)
Apply talcum to all the rubber parts but not the tires.
(e)
Lubricate all the landing gears:
-nose landing gear (Ref. TASK 12-22-32-640-002)
-main landing gear (Ref. TASK 12-22-32-640-001)
(f)
Clean all the actuator rods and apply a thin layer of HYDRAULIC FLUIDS (Material No. 02-003).
R EFF : 001-049, 101-149, 151-199, 201-299, 10-12-00Page 237 301-399, 401-499, Aug 01/05 CES
(g) Protect the bottom sections of the landing gears with STORAGE PRESERVATION (Material No. 15-002).
(2) Apply SPECIAL MATERIALS (Material No. 05-005) on all hydraulic unions in the NLG, MLG wheel-well bays.
(3) Protection of the wheels
(a) We recommend to install used tires or wheels with used tires: - on the nose landing gear (Ref. TASK 32-41-12-400-001) - on the main landing gear (Ref. TASK 32-41-11-400-006)
(b) Lubricate the bearings with COMMON GREASE (Material No. 04-001).
(c) Make sure that there is no corrosion on the brakes and on each half wheel (Ref. TASK 32-40-00-200-001).
(d) Do a check of the tire pressures (Ref. TASK 32-41-00-210-003).
(e) Protect the brakes and the wheels with STORAGE PRESERVATION (Material No. 15-002).
R **ON A/C 051-099,
R Subtask 10-12-00-620-082-A
R C. Protection of the Landing Gears and the Wheels
R (1) Protection of the landing gears
R R (a) Apply SPECIAL MATERIALS (Material No. 05-027) on the cases, brackets, screws and bolts.
R R R R (b) Apply COMMON GREASE (Material No. 04-011) : - on the sliding tube of the shock absorber - on the actuator rods - on the uplock mechanism.
R R R R (c) Apply COMMON GREASE (Material No. 04-004) : - to the towing and debogging fittings - to the uplock and downlock mechanisms after cleaning of these mechanisms.
R (d) Apply talcum to all the rubber parts but not the tires.
R (e) Lubricate all the landing gears:
R - nose landing gear (Ref. TASK 12-22-32-640-002)
R - main landing gear (Ref. TASK 12-22-32-640-001)
R (f) Clean all the actuator rods and apply a thin layer of HYDRAULIC
R FLUIDS (Material No. 02-003).
R (g) Protect the bottom sections of the landing gears with STORAGE
R PRESERVATION (Material No. 15-002).
R (2) Apply SPECIAL MATERIALS (Material No. 05-005) on all hydraulic unions
R in the NLG, MLG and CLG wheel-well bays.
R (3) Protection of the wheels
R (a) We recommend to install used tires or wheels with used tires:
R - on the nose landing gear (Ref. TASK 32-41-12-400-001)
R - on the main landing gear (Ref. TASK 32-41-11-400-006)
R (b) Lubricate the bearings with COMMON GREASE (Material No. 04-001).
R (c) Make sure that there is no corrosion on the brakes and on each
R half wheel (Ref. TASK 32-40-00-200-001).
R (d) Remove the debris guard, the impeller and the shroud of the brake
R fans (Ref. TASK 32-48-51-000-005).
R - Apply SPECIAL MATERIALS (Material No. 05-027) on the removed
R parts.
R (e) Do a check of the tire pressures (Ref. TASK 32-41-00-210-003).
R (f) Protect the brakes and the wheels with STORAGE PRESERVATION
R (Material No. 15-002).
R **ON A/C ALL
Subtask 10-12-00-550-053
D. Protection of the Water and Toilet System
(1) Protection of the potable water system
(a) If the storage period is more than 2 days:
- drain, flush and dry the system if necessary (Ref. TASK 12-24-
38-680-001).
(2) Protection of the toilet system
(a) If the storage period is more than 2 days:
-drain, flush and disinfect the system if necessary (Ref. TASK 12-16-38-613-001).
Subtask 10-12-00-620-083
E. Protection of the Flight Controls
(1)
Lubricate:
-
the mechanical control chains of the THS (Ref. TASK 12-22-27-640-007)
-
the THS-actuator ball-screw nut (Ref. TASK 12-22-27-640-003)
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM PARKING, MOORING, STORAGE & RETURN TO S(33)
