(10)
 Depressurize the aircraft hydraulic systems (Ref. TASK 29-23-00-864-001), (Ref. TASK 29-24-00-864-001), (Ref. TASK 29-10-00-864-003).

 (11)
 De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).

 (12)
 Remove all the fixtures, tools, test and support equipment used during this procedure.

 (13)
 Make an entry in the aircraft log book or attach a tag on the Captain side stick to tell the crew that the protection covers/devices are installed.

R EFF : 301-399,  10-12-00Page 251   May 01/05   CES

 **ON A/C ALL

 TASK 10-12-00-553-008

 Renewal for 6 Months Storage Period
 1. Reason for the Job
__________________

 This procedure gives the operator the possibility to do the storage procedure of 6 months again one time.
 2. Job Set-up Information
______________________

 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific 1 ACCESS PLATFORM 15M (49 FT) - ADJUSTABLE
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
10-12-00-200-009 Periodic ground-check at 3-month interval
 12-22-27-640-003 Lubrication of Trimmable Horizontal Stabilizer

 Actuator Ball Screw Nut
 12-22-27-640-004 Lubrication of all Flap Track Carriage Rollers
 12-22-27-640-005 Lubrication of Spoiler No.1 to 5 Servo Control

 Bearings
 12-22-27-640-006 Lubrication of all Slat Track Rollers, Pinion

 Bearings, Pinions and Rack Teeth 12-22-27-640-007 Lubrication of the THS Mechanical Control Chains 12-22-32-640-001 Lubrication of the MLG and Doors 12-22-32-640-002 Lubrication of the NLG and Doors 12-22-53-640-001 Lubrication of Trimmable Horizontal Stabilizer
 Bearings and Attachment Fittings
 12-22-55-640-001 Lubrication of the Rudder Bearing No. 6
 12-32-28-281-001 Drain Water Content
 12-32-28-281-003 Sample Fuel for Microbiological Contamination

 Analysis 12-32-28-281-004 Fuel Sampling for a Microbiological Contamination R Test with a Microb Monitor Test Kit (OBSOLETE)

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R R R R R R R  20-24-11-100-001 28-11-00-600-004 28-11-00-600-004 28-11-00-600-004 28-11-00-600-004 28-11-00-600-007 28-11-00-600-007 28-11-00-600-007 28-11-00-600-007 
3. Job Set-up__________
 Subtask 10-12-00-941-056
 A. Get Access

Cleaning and Protection of the CablesBiobor Biocidal Shock Treatment - With Fuel Mixed with Biocide Additive (OBSOLETE)Kathon Biocidal Shock Treatment - With Fuel Mixed with Biocide Additive (OBSOLETE)Biobor Biocidal Shock Treatment - When Fuel Mixed with Biocide Additive is not Available (OBSOLETE)Kathon Biocidal Shock Treatment - When Fuel Mixed with Biocide Additive is not Available (OBSOLETE)Introduce Biobor Biocide into Fuel - With Fuel Mixed with Biocide Additive (OBSOLETE)Introduce Kathon Biocide into Fuel - With Fuel Mixed with Biocide Additive (OBSOLETE)Introduce Biobor Biocide into Fuel - When Fuel Mixed with Biocide Additive is not Available (OBSOLETE)Introduce Kathon Biocide into Fuel - When Fuel Mixed with Biocide Additive is not Available (OBSOLETE)

 (1) Put an ACCESS PLATFORM 15M (49 FT) - ADJUSTABLEin position near the aircraft. _________
4. Procedure
 Subtask 10-12-00-553-070
 A. Ground Check

 (1) Do the periodic ground check at 3-month intervals (Ref. TASK 10-12-00-200-009).
 Subtask 10-12-00-620-095
 B. Protection

 (1)
 Lubrication of the mechanical control chains of the THS (Ref. TASK 12-22-27-640-007) and the actuator ball screw nut (Ref. TASK 12-22-27-640-003) .

 (2)
 Clean and protect the flight control cables (Ref. TASK 20-24-11-100-001).

 (3)
 Lubrication of the rollers of the flap tracks (Ref. TASK 12-22-27-640-004).

 (4)
 Lubrication of all the rollers and pinions of the slat tracks (Ref. TASK 12-22-27-640-006).

 (5)
 Lubrication of spoiler servo control bearings (Ref. TASK 12-22-27-640-005).

 (6)
 Lubrication of the hinges and the attach fittings of the horizontal stabilizer (Ref. TASK 12-22-53-640-001).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM PARKING, MOORING, STORAGE & RETURN TO S(38)