曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

are on steady.
@ ;\A;OSITION light BRT - Bright tail light
OFF - Deenergizes tail position light
DIM - Dim tail light
@ WI&POSITION light BRT - Bright wing lights
OFF - Deenergizes wing lights
DIM - Dim wing lights
0
LCD panel light oto1- Dims pilot’s liquid crystal display brightness. EIG white
thumbwheel backlighting on.
1to14- Night variable intensity
c9
INDEXER thumbwheel oto14- Variable increase in intensity of indexer lights.
0
TAXI light switch ON - Nose gear must be down and locked.and the master
exterior light switch must be on.
OFF Turns light off.
@
INSTRUMENT lights oto1- Turns instrument panel lights on.
thumbwheel
1to14 - Variable increase of intensity to a maximum brightness at
14.
@ ST;f+t FLOOD lights BRT - Bright light.
Note DIM - Dim light.
Switch must be pulled out to
be moved to BRT or DIM. OFF - Turns light off.
63
CONSOLE lights oto1- Turns console lights and console white floodlights on,
thumbwheel
1 to14- Variable increase of console lights intensity to maximum
brightness at 14.
@ $JzFLOODlights BRT Bright white instrument flood and console floodlights only.
MED White console floodlights only.
DIM - Dim white console floodlights only.
Figure 2-129. Co&pit Light Controls (Sheet 2 of 3)
2-253 ORIGINAL
NAVAIR 0%FI4AAD-1
NOMENCLATURE
m FORMATION lights I - thumbwheel
FUNCTION
oto1- Turns formation lights on.
1 to14- Variable increase of light intensity to maximum of 14.
@ s?ri;r lights master ON Enables all exterior lights except approach lights. Dims
approach lights to night intensity.
OFF Permits pilot to turn off all exterior lights except approach
lights. Sets daylight intensity on approach lights.
Figure 2-129. Cockpit Light Controls (Sheet 3 of 3)
provided for the pilot and RIO instrument and console
lighting. The thumbwheels have 14 variable selections
from 0 to 14. Initial rotation from 0 to 1 activates the
circuitry and provides a low-intensity light. Further rotation
up to a maximum intensity (14) increases the
brightness. The INSTRUMENT thumbwheel also controlstbeintensityoftbeCALJTIONADVISORYpanels,
the left and right vertical consoles, and the digital data
indicator lights, which consist ofhigh- and low-intensity
lighting. The console lights thumbwheel turns power on
for both the console lights and the floodlights. The pilot
and RIO instrument and console lights are protected by
circuit breakers on the RIO ac circuit breaker panels
(2I2,3Al, 3A2, and 3A5). Lighting for the pilot tumand-
slip indicator is controlled by the INSTRUMENT
lighting thumbwheel. The engine indicator
group uses integral white lighting for daylight operations,
and liquid crystal display brightness is controlled
by the LCD thumbwheel.
2.39.2.2 Floodlights. The floodlights consist of
4.2-watt and 20-watt white lights that illuminate the
instrument and console panels. When navigating
around thunderstorms, the storm floodlights should be
turned on bright to assist in preventing temporary blindness
from lighting. The STORM FLOOD toggle switch
on the pilot master light panel and another on the RIO
light panel are safety interlock switches that must be
pulled up to be positioned to BRT or DIM. In DIM,
low-intensity floodlighting is provided.
Note
When the storm floodlights are on (BRT or
DIM), the intensity of the CAUTION and
ADVISORY panel lights is increased to day
(bright) illumination mode.
Console and instrument panel floodlights are available
in BRT. In the MED and DIM, only console
floodlights are available. The panel floodlights are protected
by a FLOOD LTS circuit breaker (4A6) on the
RIO ac essential No. 1 circuit breaker panel (4A6). The
white floodlights am protected by the STORM FLOOD
LT circuit breaker (216) on the RIO ac right main circuit
breaker panel.
2.39.2.3 Utility and Map Lights. The piIot utility
and map light is on a bracket above the right outboard
console. The RIO utility and map light is in a bracket
above and midway along the right and left console. Each
light has a rheostat control including an ON and OFF on
the rear of the lamp. A red filter may be selected by
rotating the face ofthe lamp. Pressing the locking button
on top of the lamp permits rotating the face of the lamp
to reselect a white light with a flood or spot illumination
option. An alligator clip and swivel mounting allow the
light to be positioned on a clipboard or other convenient
location. A flasher button on the heel of the lamp allows
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：F-14D 飛行手冊 Flight Manual 1(182)