曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

12
LUBRICANTS/PENETRANTS
2
KB 88
The Ultimate Penetrant
The world’s best penetrant! KB 88 is formulated
to attack and quickly release rusted and corroded
nuts, bolts, hinges and other frozen components.
With a high KB solvency value, low surface tension,
and special additives, KB 88 enhances penetration,
lubrication and corrosion attack. This unique penetrant
outperforms the competition in independent lab
tests. KB 88 penetrates faster and deeper than most
other similar products in the market place. KB 88
meets many local, state and federal VOC regulations
such as CARB keeping the customer within VOC
regulatory guidelines.
Part No. Net Fill
02316 13 oz. (367 g)
02301 1 gal. (3.78 liters)
02305 5 gal. (18.93 liters)
02355 55 gal. (208 liters)
NEW
FDA Regulation 21 CFR 178.3570 for incidental food contact
MEETS OR EXCEEDS THESE SPECS:
FDA Regulation 21 CFR 178.3570 for incidental food contact
MEETS OR EXCEEDS THIS SPEC:
FDA Regulation 21 CFR 178.3570 for incidental food contact
MEETS OR EXCEEDS THIS SPEC:
FDA Regulation 21 CFR 178.3570 for incidental food contact
MEETS OR EXCEEDS THIS SPEC:
Food Grade Machine Oil
Food Grade Machine Oil penetrates to loosen
frozen nuts and bolts. Food Grade Machine Oil
has excellent lubricity which prevents machine
equipment from sticking, binding and squeaking.
Food Grade Machine Oil does not contain silicone
and is safe to use on most surfaces. For hard to
reach areas, it comes with an Inverta Spray Valve
allowing one to spray in an upright or inverted
position. NSF H1 registered #129000 for use in
meat and poultry plants.
Part No. Net Fill
01316 11 oz. (312 g)
Belt Dressing
FOOD GRADE NSF H1 Belt Dressing is non-drying,
water resistant and extends the life of drive
belts by improving traction and allowing runs
under reduced belt tension. It can be used in wet
outdoor conditions and prevents belt slippage
on flat, round and v-belts. It does not contain
chlorinated solvents that deteriorate drive belts.
NSF H1 registered for use in meat and poultry
plants (#134508).
Part No. Net Fill
02216 10 oz. (284 g)
Dry Film Silicone Lubricant
WITHSTANDS 500°F (260°C) This non-flammable,
petroleum-based, dry film lubricant will not
attract dust or dirt. It is excellent for releasing
molded parts at high temperatures. The colorless,
thin film provides excellent lubrication. It does not
contain chlorinated solvents.
Part No. Net Fill
01616 12 oz. (340 g)
Chain Lubricant Food Grade
NON-FLAMMABLE This silicone free, food grade
chain lubricant is excellent for applications involving
incidental food contact on food processing equipment.
The oily, wet film and foaming action provides extra
penetration and lubrication. Chain Lubricant Food
Grade helps extend chain life and reduce wear caused
by friction. NSF H1 registered #132899.
Part No. Net Fill
06016 12 oz. (340 g)
Heavy-Duty
Silicone Lubricant
WET FILM SILICONE This water-based,
silicone rich lubricant is ideal for rubber and
plastic surfaces, where petroleum products can not
be used. It is colorless and odorless and contains
no chlorinated solvents. It meets NSF H1 registration
#059820: (aerosol); #059821: (bulk).
Part No. Net Fill
01516 13 oz. (368 g)
01505 5 gal. (18.93 l)
Food Grade Silicone
Lubricant
Food Grade Silicone Lubricant is
ideal for food processing and food
handling applications. It has a dry
film which will not attract dust or dirt.
It meets the NSF regulations for H1
and the FDA requirements for incidental
food contact. Food Grade Silicone
Lubricant is ideal for releasing
molded parts and for applications in
high temperature environments. It is
fast evaporating and does not
contain chlorinated solvents. NSF H1
registered # 113815.
Part No. Net Fill
01716 10 oz. (284 g)
13 P R E M I U M
LUBRICANELETCST/RPICEANL ECTLERAANNERTSS
TEL: (800) 241-8334 or (770) 243-8800
FAX: (800) 543-1563 or (770) 243-8899 Web Site: www.lpslabs.com
FDA Regulation 21 CFR 178.3570 for
incidental food contact
MEETS OR EXCEEDS THIS SPEC:
3
a. LPS 1®
Greaseless Lubricant
MOISTURE DISPLACEMENT LPS 1® is ideal for
drying out electrical/electronic components and
delicate mechanisms. The dry, thin, lubricating film
resists oil, dust and dirt build-up while providing a
short term, light, corrosion resistant barrier. Its fast
penetration helps loosen rusted or frozen parts. LPS 1®
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料12(74)