曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

manuals.
This manual has been split into various sections with new and advanced users of the software in mind. It
covers Install procedures, network and common software operation. In the later sections software function
specific to each software type is discussed. It is recommended that special attention is paid by new users to
the first sections as it can lead to serious set-up problems later on if these various tasks are not performed
and found to be working before the software is put into use.
As a general rule, none of the information herein and none of the software can be used for real world
aviation or navigation. The software is by no means to be considered complete concerning any of the
respective aircraft’s real systems and operation. The software is designed to give familiarization of those
a/c modeled.
Unless otherwise stated, the diagrams in this document refer to Windows XP. Note that depending on your
desktop style and theme differences may be apparent in your particular set-up.
Printing Information
This manual has been designed to be printed with a B/W printer. No colour printing is necessary.
If you find technical errors in this manual please e-mail: support@projectmagenta.com
Project Magenta Revision: 12 March-08
5
Requirements
• MSFS (various versions are supported but we maintain support for the most current version)
• Win98 and above. We currently recommend WinXP
• Fully compliant OpenGL Graphics Card (Typically nVidia Gforce Cards)
• Colour Mode of 16bit and above
• 450Mhz & above (depending on program)
• Full registered version of FSUIPC
• Full registered version of WideFS (both FSUIPC and WideFS are free of charge for our customers)
• Computer Network 10Mbs TCP/IP or IPX (TCP/IP and 100MB recommended)
• File & Printer sharing Services installed and active for the Network protocol procedure. (Typically
this is TCP/IP)
Install & Set-Up
• Software is delivered by download only
• You chose which computer you want to install the software on. Every time you install the software
on a new PC a new code will be requested.
• Unzip and run the executable install program
• Run the software for the first time
• It will present a code
• Send this code to: register@projectmagenta.com
• We will send you an unlock code
• The software will now run, you still have to configure your network, WideFS, Sharing and NetDir to
be able to use it. This is covered in the next section.

　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料12(130)