曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

the NAV1 autopilot panel. The symbol on top is the symbol of the RMI style pointer in
the EHSI. The next line is the name of the nav source. The third line is the DME range
to the Nav source.
2) NAV 2 Source: This shows NAV2 information for the frequency selected on the NAV2
radio panel. The same information is provided as explained for NAV1.
3) ADF Source: This shows ADF information for the frequency selected on the ADF radio
panel. Only the name of the ADF is provided. The Course deviation indication (CDI) is
shown in pink and is tied to Nav1 only.
The top left corner has as wind speed/direction indication. In figure 6, the wind is shown as 047
degrees at 16 knots.
Arc Mode
(See Figure 2)
The ARC mode is selected by moving the knob to the "C" position as shown. The ARC mode
displays the same exact information as the Rose mode. The only difference is in the way the
information is displayed. The CDI can used in the EADI as a backup.
Off Mode
Turn the EHSI off by selecting the "L" position on the selector knob. This way the EHSI is not
taking up resources for those that use some sort of external FMC such as NavDash 2.5 or
EFIS98.
© Holger Ludwig, EuCom Airlines & Terry Yingling Seite 15 von 53
http://www.eucomairlines.de
ROSE MODE
NAV 1 Pointer
NAV 2 Pointer
Wind Speed & Direction
ADF Source
CDI
NAV 1 Source NAV 2 Source
Source ID Source ID
DME DME
Figure 1
ARC MODE
NAV 2 Pointer
Heading Bug
Wind Speed & Direction
NAV 1 Pointer
ADF Source
Course Line
NAV 1 Source NAV 2 Source
Source ID Source ID
DME DME

　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料6(133)