曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

2. Operating panel
Needed mainly for data input. Additionally used to display steam oven main
status.
TR1 A318/A319/A320/A321 FLEET CCOM Page 45 of 53
CABIN CREW OPERATING MANUAL
CABIN INTERIOR
GALLEYS
02.140
JAN 08/08
OPERATING PANEL
TR1 A318/A319/A320/A321 FLEET CCOM Page 46 of 53
CABIN CREW OPERATING MANUAL
CABIN INTERIOR
GALLEYS
02.140
JAN 08/08
1. ON/OFF pushbutton
Has main switch function.
An integrated LED lights up in ON position.
2. CLEAR pushbutton
Used to stop or change cooking start time delay and cooking program
(sequence).
3. PRESET pushbutton
Allows to execute a cooking start time delay.
An integrated LED lights up to indicate that this function is activated.
4. DRY-HEAT pushbutton
Selects the cooking program DRY-HEAT.
An integrated LED lights up to indicate that this program is activated.
5. MEDIUM pushbutton
Selects the cooking program MEDIUM.
An integrated LED lights up to indicate that this program is activated.
6. LOW pushbutton
Selects the cooking program LOW.
An integrated LED lights up to indicate that this program is activated.
7. TIME + pushbutton
Increases the default time of the cooking start time delay or a cooking
program. Each time the pushbutton is pressed, the default time makes an
one-minute-step upwards.
8. TIME - pushbutton
Decreases the default time of the cooking start time delay or a cooking
program. Each time the pushbutton is pressed, the default time makes an
one-minute-step downwards.
9. READY LED (green)
Lights up when the steam oven is ready to heat up food.
10.FAIL LED (red)
Lights up when the steam oven has a malfunction.
STEAM OVEN SOFTWARE
The steam oven software has three cooking programs (LOW, MEDIUM,
DRY-HEAT). It is possible to use them as single cooking programs or to combine
at least two of them to a cooking program sequence.
Cooking programs:
-- LOW
Produces steam at low temperature.
TR1 A318/A319/A320/A321 FLEET CCOM Page 47 of 53
CABIN CREW OPERATING MANUAL
CABIN INTERIOR
GALLEYS
02.140
JAN 08/08
-- MEDIUM
Produces steam at high temperature.
-- DRY-HEAT
Produces no steam. Oven heats up conventional.
All cooking programs operates with a default time of 20 minutes. If necessary,
manual overriding of the default time in one-minute-steps is possible.
Additionally a cooking start time delay can be selected. It allows to finish cooking
at a defined point of time without keeping in mind when to start the cooking
program (sequence). If necessary, manual overriding of the default time (10
minutes) in one-minute-steps is possible.
OPERATING THE STEAM OVEN
Note: If there is a pushbutton to be pressed, then in every case it is located at
the operating panel.
TAKING THE STEAM OVEN INTO SERVICE
1. Press the ON/OFF pushbutton.
The integrated LED lights up. A start message appears on the oven display.
2. Wait for a few seconds until the oven display shows the message:
** STAND BY **
Additionally, the inner temperature of the steam oven is displayed (in °C).
The green READY LED at the operating panel lights up.
The steam oven is now ready to be loaded and to cook.
TR1 A318/A319/A320/A321 FLEET CCOM Page 48 of 53
CABIN CREW OPERATING MANUAL
CABIN INTERIOR
GALLEYS
02.140
JAN 08/08
OPENING THE DOOR
1. Swivel the 1/4-turn retainer to unlocked position.
2. Turn the door knob into position OPEN.
3. Swivel out the door.
CLOSING THE DOOR
1. Swivel in the door.
2. Push the door against the housing.
3. Turn the door knob into position LOCK.
4. Swivel the 1/4-turn retainer to locked position.
PROGRAMMING THE STEAM OVEN
WARNING
Danger of injury!
Do not start programming the steam oven before the door knob is in position
"LOCK".
1. If a starting time delay is requested:
a) Press the PRESET pushbutton.
The integrated LED lights up.
The oven display shows the default time.
b) If necessary, change the default time by pressing the corresponding
pushbutton TIME + or TIME -. Each time a pushbutton is pressed, the
default time makes an one-minute-step upwards or downwards depending
on the corresponding pushbutton.
2. Select the cooking program by pressing the corresponding pushbutton (LOW,
MEDIUM or DRY-HEAT).
The integrated LED lights up.
The oven display shows the default time.
3. If necessary, change the default time by pressing the corresponding
pushbutton TIME + or TIME -. Each time a pushbutton is pressed, the default
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320_Generic_Training_CCOM 上(38)