曝光臺(tái) 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費(fèi)者

CONTROL
 PART
a) Outer ring ~ For selection of the units for the barometer reference-either hectoPascals
   or inches of mercury.
Note ~ The unit selected does not appear on the PFD
b) Inner knob : For selection of the reference value displayed in the barometer reference
   display window and on the PFD below the altitude scale.
   At FCU initialization, the window displays 1013 or 29.92, depending on the unit
   selected.
   ~ Pulling the knob selects the standard baro reference setting. The PFD then displays
    "STD." (Rotating the knob has no effect.)
   ~ Pushing the knob from the STD position makes the last selected QNH baro setting
    displayed.
CCM MSN t068
┏━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━┳━━━━━━━━━━━┓
┃                                ┃                                ┃1.31.50     P 2       ┃
┃                                ┃                                ┣━━━━━┳━━━━━┫
┃I  -~ A318                      ┃I INDICATING/REFISDCONTROLSEMS  ┃SEQ 001 1 ┃  REV 29  ┃
┃  ..,,.8, ,, ~L,~ A319          ┃                                ┃          ┃          ┃
┃ Lii,~ A320                     ┃                                ┃          ┃          ┃
┃      A~7-~'M" A321             ┃                                ┃          ┃          ┃
┃   FLIGHT CREW OPERATING MANUAL ┃                                ┃          ┃          ┃
┗━━━━━━━━━━━━━━━━┻━━━━━━━━━━━━━━━━┻━━━━━┻━━━━━┛
~
FD Pushbutton
Pushing this button removes the FD bars from the associated PFD (or removes the flight
path director symbol if the TRK FPA reference is selected).
The pushbutton light goes out.
Pushing it again restores the FD bars (or the FPD symbol) and the green pushbutton light
comes on.
(~ ILS (or LS) Pushbutton
~
Pushing this button displays the Iocalizer and glide slope scales on the PFD
Deviation symbols appear if there is a valid ILS signal.
The green pushbutton light comes on.
Mode Select Switch
This switch selects a navigation display for the onside ND
(~ Range Select Switch
0
This switch selects a range scale for the onside ND
Note : If the mode or the range data fails, the default selection is the ROSE NAV mode
       and 80 NM range.
ADF-VOR Select Switches
These switches select ADF or VOR bearing pointers and DME distance on the onside ND,
as well as the corresponding navaid data characteristics in any mode except PLAN
mode.
(~ Optional Data Display Pushbutton
Pushing this button displays optional data in addition to the data permanently displayed
in PLAN, ARC, or ROSE NAV modes. The green pushbutton light comes on.
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：AIRBUS A320 Flight Crew Operating Manual4(86)